Spray dryer,_specification/price/image

Product Detail
Company Profile

Spray drying is a fast drying, atomization of liquid materials have large surface area, resulting in higher heat transfer coefficient. Short drying time and temperature suitable material fast and stable, which means spray drying for heat sensitive materials.

Spray drying technology consists of four basic stages:

a. Atomization: liquid material through a nozzle or rotary atomizer atomized into droplets. Pressure or compressed air atomization nozzle with materials, and high-speed rotary atomizer spray atomization wheel.

b. Drying: hot air (air or nitrogen) through the air distributor of raw materials in contact with the spray began to evaporate. Temperature, flow rate, droplet size control the drying process.

c. Particle formation: the rapid evaporation of liquid from the droplets to form solid particles into the drying tower bottom.

d. Recovery: The recovery of the cyclone or bag filter dust emissions. The entire process usually only a few seconds

Describe	Small Spray drying equipment
Model	Syclon-8000S	Syclon-8005S
Process Capacity（L/H)	0.05-1	0.5-5
Max capacity of water evaporator（L/H)	2.0	6
Max inlet temperature（°C）	300	300
Typical average partical size range(microns)	2-25	5-80
Atomizer in the form
And two-fluid nozzle flow	standard	standard
Rotary atomizer	Not available	available
Fountain two-fluid nozzle	Not available	available
Bag filters	Not available	available
Built-in bed	Not available	available
Nitrogen protection system	available	available
Heating	Electric heating	Electric heating
Materail contact with the material component	Borosilicate glass and SS 316	SS 316
Power（kw）	3.8	10
Power supply	220V/50HZ	380V/50HZ
Space requirments （Open LxWxH m）	0.7x0.65x1.1	2.5x2.0x2.3
N/W（kg）	58	250