Product Introduction

TrySmet DT series vaporizing hydrogen peroxide sterilizer all series adopt the unique new generation low temperature jet vaporization process, it is a reliable dry process which can completely vaporize the sterilant, with higher vaporization efficiency, and can effectively reduce various safety hazards existing in the traditional gasifying process, while ensuring the most thorough sterilization effect, avoid corrosion. Reduce the dosage of disinfectant.

DT-300W - KPa pressure maintenance ability, to maintain inner pressure of lab(Positive & Negative)
 

Product Features

1. Portable structure design, universal casters of equipment, easy to use.

2. Positive and Negative Pressure Modes: Available, with leak detection port.

3. KPa pressure self-test system

4. Degradation: Equipped with degradation device, degrades the outgoing gas in real time during the sterilization process.

5. Modular Design: The equipment adopts a modular design concept, with interfaces reserved for intelligent probe modules, wireless network modules, smart laboratory modules, intelligent printing modules, etc., which can be configured and selected or upgraded later as needed.

6. Intelligent Hardware: Built-in high-sensitivity temperature/humidity/hydrogen peroxide concentration three-in-one probe, which can adjust the disinfectant injection rate in real time according to the room temperature, humidity and hydrogen peroxide concentration during sterilization.

7. Intelligent Software: The control software has 8 sets of sterilization programs built in, the core parameters of each set of programs can be set and adjusted, and can real-time calculate and display the remaining log value and remaining sterilization time.

8. Efficient: Rapid aseptic circulation, cost saving.

9. Broad-spectrum: It has broad-spectrum bactericidal effect, suitable for killing fungi, bacteria, viruses and spores.

10. Open Hydrogen Peroxide Consumables: Users can independently choose reagents according to their own management needs.
 

Technical Parameters

l Structure: Aluminum and stainless steel

l Sterilization Volume : 300 m³

l Sterilization Effect : 1-12 log optional

l Display Function: 10.1-inch touch screen
| Sensor: High-sensitivity three-in-one sensor for monitoring temperature, humidity and hydrogen peroxide concentration (ppm).

l Control System: Intelligent process -control system

l Management Authority: Three-level management authority password protection

l Power: 200-240V, 50/60Hz, 2250W(Available for International option)

l Storage tank capacity: 2L

l External Dimensions: 765×595×1210mm
 

Application: 

For Long & Narrow Space, General Labs,Complex Space

Email us for more information: alia.xu@create-labs.com