Why measuring SDI:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
· To check if feed water is within feed water specifications of the purification system.
· To size extra pretreatment, if water outside specs.
· To calculate the water recovery for Large Systems.
Product Description:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The RephiLe SDI Kit is used to measure the quantity of particulate contamination in relatively low-turbidity water supplies or waste streams.
Based on ASTM Method 4189-95, the test is accepted industry-wide to estimate the rate at which colloidal and particle fouling will occur in water purification systems.
Silt Density Index Test:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
· Fully open the inlet valve (check pressure = 30 psi)
· Start the timer and measure the water flow rate through the membrane at start and end time.
· Also measure flow rates all along the 15min and draw a flow decay curve.
The RephiLe SDI Kit includes:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
· Pressure regulator with gauge,
· Filter holder,47 mm
· SDI Membrane discs, 47mm,0.45um,100/PK
· Graduated cylinder, 500 mL,
· Stopwatch for SDI testing
· All necessary valving, tubing and fittings in a plastic case.
Ordering Infromation:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
Catalogue No
|
Description
|
Compatible System
|
Millipore Catalogue No
|
|
RASDI0001
|
RephiLe SDI Kit
|
FOULING INDEX KIT
|
ZLFI00001
|
|
RASDI045H
|
SDI Membrane（0.45um,100/PK）
|
|
HAWP04700
|
Contact us for more information
US: call toll free 1-855-RephiLe (1-855-737-4453)
Other Countries: email : info@rephile.com. A local representative in your area will contact you.
Other Products:
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
>>Replacement Cartridges for Millipore systems
>>Ultrapure Water System
>>Pure Water System
>>Filtration Products
中文
