ZYDP DI Water System for Lab
ZYDP super micro ultrapure water machine is composed of pre-treatment column, RO membrane and ultrapure cartridge with intelligent design and high standard water quality for high-level laboratory experiments. The PLC touch screen operation is smart like handphone. English interface read easily and conveniently. Good consumables filtrate and remove the ions, microparticle, organics, bacteria, virus, residual chlorine and other impurities to get 2-10us/cm RO water and 15-18.25MΩ.cm ultrapure water.
Parameter of DI Water System for Lab:
*. Capacity: 10-100L/H;
*. Power supply: 220V/110V, 50Hz/60Hz;
*. Requirement of raw water quality: < 200ppm;
*. Water pressure: 0.1-0.5MPa; Working temperature: 4-45℃(best temp.: 25℃);
*. Noise: ≤40dba; Relative humidity: ≤85%RH;
*. Water flow: 1.5-2.0L/min (water tank full);
*. Water tank: 30L sterile water tank or 100L PE tank.
Note:
1. The best water temperature for the machine is 25℃. Every 1℃ drop, the water production of RO membrane decreases 3%. Especially when the water temperature is under than 5℃, the RO membrane will stop producing water. So please pay attention to your room temperature.
2. The test raw water's TDS is less than 200ppm, so if your raw water's quality is worst than our standard, we suggest you to choose our double RO system or double pre-treatment system to ensure water quality.
Features
· Automatic microcomputer ZYDP big color touch screen LCD display, human-machine interactive interface allow you to fully monitor the working status of the controller and real-time data (resolution: HD,size: 111x62mm).
· Automatic RO membrane anti-fouling flushing (2-hour interval ).
· Comprehensive system maintenance and alarm.
· User-friendly manual / automatic water intake mode, and timing (1-99min), qualitative water intake function (0.1-18.2MΩ.cm).
· Dual wavelength (185nm & 254nm)UV lamp components (imported lamp), effective sterilization, reduce TOC.
· MWCO5000DUF ultrafiltration module (imported), effective removal of heat (endotoxin), can be used for sophisticated cell culture and IVF.
The process flow
1. PLC Touch Screen: Colorful and intelligent; ( resolution ratio: high definition; size: 111*62 mm)
2. Pre-treatment system:
PP filter (DN: 5 μm or 1um): efficiently filtrate silt, rust, suspended matter, algo, colliod and all impurities whose diameter is over than 5 μm in the raw water.
AC filter: to adsorb residual chlorine, pigment, off-flavor, and part of organic matters.
3. Reverse osmosis system: This filtration technique make use of pressure differential as impetus to produce deionized water by RO membrane. Desalinization rate: ≥ 99.5%.
中文
