● Divinylbenzene polymer particle, non-polar, close to traditional PoraPak Q
 
● Truly immobilized coating and smooth baseline workable for valve switching and liquid sample introduction at low temperatures
 
● Highest temperature limit, up to 280/300℃
 
● Baseline separation of Air, CO2, water, sulfur gases, hydrogen chlorine, ammonia/light amines from hydrocarbons such as refinery   stream, natural gas, and engine exhaust
 
● Excellent separation of C1 to C3 isomers, good separations of C3 to C12, halocarbons
 
● Excellent inertness and long lifetime of water/alcohol sample, a good secondary choice of wax column for alcohol analysis
 
● Excellent tolerance to strong acid/base sample without affecting retention time
 
● Good anti-oxidation at 280℃ and fast regeneration of performance 
 
● Observed slight sulfur gas, hydrogen chlorine, and amine absorption
 
●Water peak is tailing, but no effect on retention
 
● Good choice for analyzing low level solvent residues from wide samples, such as headspace, aqueous, or organic solutions
 
● Preferred column for residue analysis in petroleum industry, pharmaceutical, environmental, chemical weapon detection
 
● Preferred column to analyze polar compounds including oxygenates from hydrocarbon streams: natural gas, refinery gas, dieneethylene, propylene
Similar Phases: HP-PLOT Q, GS-Q, CP-PoraPLOT Q HT, Supel PLOT Q, Rt-Q, ZB-PLOT Q
 
| Category | P/N | Description | Length (m) | ID (mm) | Film (um) | Temperature Limit (C) | 
| DA-PLOT Q | 8625-3010 | DA-PLOT Q, 30m x 0.25mm x 10.0um | 30 | 0.25 | 10.00 | -80 to 280C | 
| DA-PLOT Q | 8632-3015 | DA-PLOT Q, 30m x 0.25mm x 15.0um | 30 | 0.25 | 15.00 | -80 to 280C | 
| DA-PLOT Q | 8632-1515 | DA-PLOT Q, 15m x 0.32mm x 15.0um | 15 | 0.32 | 15 | -80 to 280/290 | 
| DA-PLOT Q | 8632-3015 | DA-PLOT Q, 30m x 0.32mm x 15.0um | 30 | 0.32 | 15 | -80 to 280/290 | 
| DA-PLOT Q | 8632-5005 | DA-PLOT Q, 50m x 0.32mm x 5um | 50 | 0.32 | 5.00 | -80 to 280/290 | 
| DA-PLOT Q | 8653-1530 | DA-PLOT Q, 15m x 0.53mm x 30.0um | 15 | 0.53 | 30 | -80 to 280/290 | 
| DA-PLOT Q | 8653-3030 | DA-PLOT Q, 30m x 0.53mm x 30.0um | 30 | 0.53 | 30 | -80 to 280/290 |