中文
AELAB Laboratory Pipette Fillers – Levo ME & Levo Plus
- Product Detail
- Company Profile
- Cell culture media aspiration and dispensing
- Preparation and transfer of buffers and laboratory reagents
- Liquid handling in pharmaceutical quality control laboratories
- Clinical, diagnostic and biomedical laboratory workflows
- Food, beverage and microbiological testing
- Environmental and water-testing laboratories
- Chemical sample preparation and routine analysis
- University teaching and scientific research laboratories
- Transfer of liquids with glass or plastic serological pipettes
- Routine repetitive pipetting and media preparation
- Single-handed fingertip aspiration and dispensing control
- Compatible with 0.1–100 mL glass and plastic pipettes
- Compatible with Pasteur pipettes
- Aspirates 25 mL in less than 7 seconds
- Motor-assisted or gravity dispensing
- Lithium-ion battery
- More than 8 hours of intermittent battery operation
- Approximately 2–3 hours charging time
- Replaceable 0.45 µm hydrophobic filter
- Approximate device weight: 200 g
- Six selectable aspiration-speed levels
- LCD display for speed and battery status
- Compatible with 0.1–100 mL glass and plastic pipettes
- Compatible with Pasteur pipettes
- Aspirates 25 mL in less than 5 seconds
- Motor-assisted or gravity dispensing
- Replaceable lithium battery
- More than 12 hours of intermittent battery operation
- Approximately 4–5 hours charging time
- Replaceable 0.45 µm hydrophobic filter
- Approximate device weight: 208 g
- Eliminate unsafe mouth pipetting practices
- Provide controlled aspiration and dispensing
- Reduce operator fatigue during repetitive pipetting
- Accelerate medium- and larger-volume liquid transfer
- Support glass and plastic laboratory pipettes
- Offer motor-assisted and gravity dispensing options
- Help protect internal components through hydrophobic filtration
- Improve working comfort during routine laboratory procedures
- Provide rechargeable operation without a continuous power connection
- Support a wide range of research, testing and quality control workflows
- Inspect the pipette adapter and filter regularly for contamination or damage.
- Replace the hydrophobic filter if it becomes wet, blocked or contaminated.
- Avoid drawing liquid beyond the safe filling level of the connected pipette.
- Clean the external housing with a suitable mild laboratory disinfectant.
- Do not immerse the electronic pipette filler in water or cleaning solution.
- Store the device upright on its stand when it is not in use.
- Recharge the battery according to the operating instructions.
- Confirm that the pipette is securely attached before aspiration.
- Use only compatible replacement filters, adapters, batteries and accessories.
- Follow the product manual and laboratory safety procedures during operation.
- Electronic models for routine and high-performance pipetting
- Compatibility with glass and plastic pipettes from 0.1 to 100 mL
- Motor-assisted and gravity dispensing modes
- Rechargeable lithium battery operation
- Replaceable hydrophobic filters for internal protection
- Lightweight and ergonomic designs for repetitive laboratory use
- Model-selection support before quotation
- International supply, export packaging and shipping support
- Technical consultation for distributors, laboratories and project buyers
AELAB supplies ergonomic electronic pipette fillers designed for safe, accurate and efficient liquid handling in research laboratories, universities, pharmaceutical quality control departments, clinical laboratories, cell culture facilities and industrial testing laboratories.
AELAB pipette fillers provide controlled aspiration and dispensing for glass and plastic serological pipettes. Available models include the compact Levo ME and the high-performance Levo Plus, with different aspiration speeds, battery operating times and control features.
Customers can compare AELAB pipette filler models according to pipette compatibility, aspiration speed, dispensing mode, battery life, charging time, display requirements, operating comfort and daily laboratory workload.
View AELAB Pipette Filler Models and Specifications
Compare the AELAB Levo ME and Levo Plus electronic pipette fillers for controlled, comfortable and efficient laboratory liquid transfer.
Available AELAB Pipette Filler Models
| Model | Main Features | Recommended Use |
|---|---|---|
| AELAB Levo ME | Single-handed fingertip operation, fast aspiration, lithium-ion battery, motor or gravity dispensing and replaceable hydrophobic filter. | Routine laboratory liquid transfer, educational laboratories, research work, clinical testing and quality control applications. |
| AELAB Levo Plus | Six aspiration-speed levels, LCD battery and speed display, fast motor performance, replaceable battery and ergonomic grip. | Repetitive pipetting, high-throughput workflows, cell culture, media preparation and laboratories requiring greater speed control. |
What Is a Pipette Filler?
A pipette filler, also called a pipette controller or pipette aid, is a handheld laboratory device used to aspirate and dispense liquids through compatible glass or plastic pipettes. It provides controlled liquid transfer while eliminating the unsafe practice of mouth pipetting.
Electronic pipette fillers use a motorized airflow system to draw liquid into a pipette. Depending on the selected model and operating mode, liquid can then be dispensed through motor-assisted control or gravity flow.
A pipette filler is normally selected for medium- and larger-volume liquid transfer using serological, volumetric or Pasteur pipettes. It is different from a micropipette, which is primarily designed for precise microliter-volume dispensing.
Typical Applications
How to Select the Right Pipette Filler
Selecting a pipette filler should not be based only on maximum pipette volume. Users should also consider aspiration speed, speed-control options, dispensing method, battery operating time, charging requirements, pipette compatibility, filtration, weight and the frequency of daily pipetting.
| Selection Factor | Questions to Consider |
|---|---|
| Pipette Compatibility | What types and volumes of glass, plastic, serological or Pasteur pipettes are used in the laboratory? |
| Aspiration Speed | Is rapid filling required for repetitive or high-throughput liquid handling? |
| Speed Adjustment | Does the application require multiple selectable speed levels for different pipette sizes or liquid characteristics? |
| Dispensing Method | Is motor-assisted dispensing, gravity dispensing or access to both modes required? |
| Battery Operating Time | How many hours of intermittent use are required before the device must be recharged? |
| Display and Controls | Is an LCD screen required for displaying aspiration speed and battery status? |
| Ergonomic Design | Will the pipette filler be used repeatedly for long periods during the working day? |
| Contamination Protection | Does the device include a replaceable hydrophobic filter to help protect the internal motor from liquid entry? |
AELAB Pipette Filler Product Models
The AELAB Levo ME is designed for efficient single-handed pipetting with fingertip aspiration and dispensing control. Its lightweight, ergonomic structure supports comfortable routine liquid handling in research, educational, clinical and quality control laboratories.
The Levo ME is compatible with glass and plastic pipettes from 0.1 to 100 mL, as well as Pasteur pipettes. It can aspirate 25 mL in less than seven seconds and provides motor-assisted or gravity dispensing.
The AELAB Levo Plus is a high-performance electronic pipette filler developed for fast, controlled and fatigue-reducing laboratory pipetting. It includes six aspiration-speed levels and an LCD screen that displays the selected speed and remaining battery status.
Its quiet and powerful motor can fill a 25 mL pipette in less than five seconds. The device supports glass and plastic pipettes from 0.1 to 100 mL and provides both motor-driven and gravity dispensing.
AELAB Levo ME vs. Levo Plus Pipette Filler
| Specification | Levo ME | Levo Plus |
|---|---|---|
| Aspiration Speed | 25 mL in less than 7 seconds | 25 mL in less than 5 seconds |
| Speed Control | Fingertip speed adjustment | Six selectable speed levels |
| Display | Not specified | LCD speed and battery display |
| Dispensing Modes | Motor or gravity | Motor or gravity |
| Pipette Range | 0.1–100 mL | 0.1–100 mL |
| Pipette Materials | Glass and plastic | Glass and plastic |
| Battery Service Life | More than 8 hours intermittent use | More than 12 hours intermittent use |
| Charging Time | Approximately 2–3 hours | Approximately 4–5 hours |
| Filter | Replaceable 0.45 µm hydrophobic filter | Replaceable 0.45 µm hydrophobic filter |
| Weight | Approximately 200 g | Approximately 208 g |
Pipette Filler vs. Micropipette
| Comparison | Pipette Filler | Micropipette |
|---|---|---|
| Typical Pipette | Serological, volumetric or Pasteur pipette | Disposable micropipette tip |
| Typical Volume Range | Medium- to larger-volume liquid transfer | Microliter-volume liquid transfer |
| Operation | Motorized or manual airflow control | Piston and plunger mechanism |
| Typical Applications | Cell culture, media preparation and reagent transfer | PCR, assays and precise small-volume dispensing |
Benefits of Electronic Pipette Fillers
Pipette Filler Maintenance Recommendations
Why Choose AELAB Pipette Fillers?
AELAB is a laboratory equipment brand and supplier based in Guangzhou, China. AELAB provides analytical instruments, laboratory equipment and quality control solutions for distributors, universities, research organizations and industrial customers worldwide.
The AELAB product range includes laboratory liquid handling equipment, weighing instruments, analytical equipment, environmental testing systems, pharmaceutical testing instruments, sample preparation equipment and customized laboratory solutions.
Official website: https://aelabgroup.com
Frequently Asked Questions
What pipette filler models does AELAB supply?
AELAB offers the Levo ME electronic pipette filler for efficient single-handed operation and the Levo Plus pipette filler for faster performance, six-level speed adjustment and LCD status monitoring.
What pipette sizes are compatible with AELAB pipette fillers?
The Levo ME and Levo Plus models are designed for compatible glass and plastic pipettes from 0.1 to 100 mL. They can also be used with compatible Pasteur pipettes.
What is the difference between Levo ME and Levo Plus?
Levo ME is a compact single-handed model that fills a 25 mL pipette in less than seven seconds. Levo Plus provides six selectable aspiration speeds, an LCD screen and faster aspiration of 25 mL in less than five seconds.
Can the pipette fillers dispense liquid by gravity?
Yes. Both AELAB models support motor-assisted dispensing and gravity dispensing, allowing the operator to select a suitable method for the liquid handling procedure.
Why is a hydrophobic filter used in a pipette filler?
The hydrophobic filter helps prevent liquid and aerosol contamination from entering the airflow system and internal motor. A wet or contaminated filter should be replaced.
Which model is suitable for frequent or high-throughput pipetting?
Levo Plus is generally more suitable when faster aspiration, six speed levels, an LCD status display and longer intermittent battery operation are required. Final selection should be based on the actual laboratory workflow.
Can AELAB recommend a pipette filler based on my application?
Yes. Send the pipette type, pipette volume range, liquid type, daily workload, required speed control, application and destination country. The AELAB team can recommend a suitable model and prepare a quotation.
Tell the AELAB technical sales team which pipette types and volumes are used in your laboratory, the required aspiration speed, daily operating frequency, preferred dispensing mode and application. A suitable pipette filler can then be recommended according to your actual workflow.
The quotation can include available models, technical specifications, replacement filters, optional accessories, delivery time, packaging and shipping information.
View AELAB Pipette Filler Models
Email: info@aelabgroup.com
WhatsApp / WeChat: +86 158 0001 6110
Website: www.aelabgroup.com
-
AELAB GUANGZHOU CO., LTD.
AELAB is a laboratory equipment and analytical instrument supplier based in Guangzhou, China. We provide laboratory instruments, quality control equipment, analytical systems, sample preparation equipment, and related laboratory solutions for distributors, industrial laboratories, universities, research organizations, and testing centers worldwide.
AELAB offers both our own-brand products and carefully selected instruments from established manufacturers. OEM and ODM services are available for selected AELAB products, including customized branding, appearance, configuration, power supply, accessories, packaging, and documentation according to customer requirements.
For laboratory projects, distributor orders, government tenders, and complete laboratory setups, our team can provide a one-stop purchasing solution. We assist customers with product selection, technical comparison, quotation preparation, sourcing, quality inspection, export packaging, shipping coordination, and after-sales support.
Our technical team helps customers select suitable equipment based on their application, testing method, required specifications, budget, and local standards. Warranty and technical support are provided according to the product and project requirements.
AELAB operates under an established quality management system. Relevant company and product documentation may include SGS verification, ISO certification, CE, RoHS, FCC, or UL-related documentation, depending on the specific product model and configuration. Customers may contact us to confirm the available certificates before ordering.
Our equipment is widely used in industrial quality control, scientific research, universities, pharmaceutical laboratories, food and agricultural testing, environmental analysis, chemical laboratories, and other professional testing applications.
We are committed to developing long-term cooperation with distributors, laboratories, research institutions, and project contractors. If you are looking for a reliable laboratory equipment supplier with stable service and technical support, please contact AELAB.
Contact AELAB
Website:
https://aelabgroup.com
Email:
info@aelabgroup.com
WhatsApp / WeChat:
+86 15800016110
| Request Information |
| Other Products |
| Related Products |
| Recently viewed products |