SD3
Machine Vision and Inspection USB 2.0 CMOS Camera
Specifications
SENSOR:MT9T001
Effective pixels:2048×1536(3M)
Resolution:2048×1536:9FPS
Pixel size:3.2μm×3.2μm
Image data format:Raw8/Raw10
Sensibility:>1.0V/Lux-sec(550nm)
SNR:43dB
Dynamic range:61dB
Scanning mode:Progressive scan
Shutter:Electronic rolling shutter
Exposure time:0~300ms
Exposure control:Auto exposure/Manual exposure/Area exposure
White balance:Manual white balance/Once key white balance/Area white balance
Product firmware update:Remote update is supported
Camera ID:User writing ID into camera is supported
Programmable control:Camera working speed,image dimension,shootmode,image lightness,exposure time,gain,anti-flick,GAMMA,contrast,RGB gain,saturation,black balance,sharpness
Support system:Windows XP(32-bit); Win7(32/64-bit)
Support interface:TWAIN，DirectShow
Data interface:USB2.0 480Mb/s
Product indicator:LED constantly being on when power on and standing by and blink when working
Power consumption:Work≤1.3W，Stand by ≈0.3W
Working temperature :0℃~50℃
Storage temperature:-20℃~60℃
Working humidity:10%-90%RH（No condensation）
Storage humidity:10%-60%RH
Lens Mount:C/CS mount
PCB Size:33×33mm（2 blocks）
Product dimension:44.1×43×41.5mm（Without extension ring and outer fixed block）
Product weight:About 123g
bio-equip.cn
中文
