1.Freeze-drying machine applies a technical method by which moisture-bearing samples
frozen in advance become dry in the vacuum owing to vaporizing away the moisture.
2.The samples frozen can be well-storage for a long time and returned to their former
state once being watered without losing their original biochemical properties.
3. The freeze drying technology is especially ideal for those bio-products sensitive to
antibiotic,vaccines, blood products, enzymesand hormones.
4. This machine is also suitable for sample freezing experimentsin labs and
small-scale production.
5.The Series can be divided into four type: Ordinary,Top-Press,Ordinary Multi-Pipeline,
Top-Press Multi-Pipeline, T-Frame,with Pre-Freeze Function.
Characteristics:
1.Accord with international standards of Green environmental friendly
2. 7" True color Touch Screen, Chinese English Bilingual Interface, display drying curve and history curve;
3. U disk Can storage lyophilized data;
4.Upload software can print curve;
5. Embedded circuit design, 128 M FLASH, can save dozen times Lyophilized data;
6.Large opening trap, no coil inside, with samples pre-freeze function
7.Imported refrigeration compressor, low noise
8. Cold trap and control panel were made by stainless steel, corrosion resistant, easy to clean
9.Transparent Bell type drying room, secure and ocular
10. Stainless steel sample holder, common sample plate spacing adjustable
11. Small size and easy to operate
12. Nitrogen inflation valve within
Main Technical Parameters:
|
No-load Temperature
|
<-56℃
|
|
Freeze Area
|
0.076 m2
|
|
Plate Load Capacity
|
1 L
|
|
Ability to Capture Water
|
3 Kg
|
|
Vacuum Degree
|
<10Pa
|
|
Machine Dimension
|
W450×D580×H830 mm
|
|
Sample Tray Size
|
Ø 3×180 mm
|
|
Power
|
1000W
|
|
Power Supply
|
110V/60Hz or 220V/50Hz
|
|
interlayer spacing
|
70 mm
|
|
Cold trap size
|
Ø215×160 mm
|
|
The number of Schering bottles
|
Ø22: 165;Ø16: 285;Ø12: 560
|
中文
