Working Principle:
Air goes through filtration and heating, enters into air distributor in the top of dryer, then the hot air spirally and evenly enters into dryer. Feed liquid is rotated spraying into extremely slight mist shape droplet via high speed centrifugal atomizer which in the top of the tower, then it parallelly contacts with hot air, drying to finished products in a very short time. Finished products continuously output by drying tower bottom and cyclone separator, and waste gas is excluded by draught fan.
Technical Parameters:
|
Capacity |
5kg/h (max) |
Tower Diameter/Height |
1.0m/2.15m |
|
Operating Temp.: |
Temp.: 180°C; Exit temp.: 90°C |
Atomizer plate size: 50mm |
Pneumatic; rotated speed: 25000r/min; |
|
Installed Power: |
Transmission: 0.75kw |
Compressed air consumption: |
0.2m3/Min (0.6MPa) |
|
Electrical heating: 10kw |
Water consumption: |
0.1m3/h |
|
Drying system form: |
Open cycle system |
Feeding mode: |
Automatic peristaltic pump stable feeding |
|
Hot air contact form: |
Cocurrent flow |
Heat source mode: |
Electircal heating |
|
Products capture mode: |
Cyclone |
Atomization way: |
Centrifugal |
|
Control mode: |
Set arbitrary, automatic control entering air temperature; digital display temperature, frequency conversion adjust atomization speed; |
|
Dimensions: |
1.8x1.4x2.15 (m3) |
Weight: |
About 1ton |
|
Ambient enviroment: |
1atm; 20°C, RH80% |
Power source: |
Three-phase, 380V, 50Hz. |
XO-8005 Model single unit configuration detail specification:
|
|
Parts Name |
Model |
Quantity |
Material |
Remarks |
|
Feeding system |
|
1 |
Peristaltic pump |
BT-100 |
1piece |
Sanitary grade |
0.3KW |
|
2 |
Feed pipe, valves |
|
1set |
SUS304 |
|
|
Medium circulation system |
|
1 |
Draught fan |
9-19 |
1piece |
SUS304 |
0.75KW |
|
2 |
ventilating butterfly valve |
|
1piece |
SUS304 |
|
|
3 |
Hot air thermal insulation pipes |
|
1set |
SUS304 |
|
|
4 |
Exhaust pipe |
|
1set |
SUS304 |
|
|
5 |
Pipes |
|
1set |
SUS304 |
|
|
Air heating purification system |
|
1 |
Air filter |
|
1set |
SUS304 |
|
|
2 |
Electric heater |
15KW |
1set |
SUS304 |
|
|
3 |
Reducing nipple |
|
1set |
SUS304 |
|
|
4 |
Hot air duct |
|
1set |
SUS304 |
Heat preservation |
|
Drying host system |
|
1 |
Spray drying room |
D1000H2150 |
1set |
SUS304 |
Host with explosion venting panel mouth |
|
2 |
Hot air distributor |
|
1set |
SUS304 |
|
|
3 |
Hot air diffuser |
|
1set |
SUS304 |
|
|
4 |
Atomizer |
Plate size 50mm |
1set |
SUS304 |
pneumatic |
|
5 |
Illuminator |
100W |
1set |
|
|
|
6 |
Observation manhole |
|
1set |
SUS304 |
|
|
7 |
Thermal insulation |
|
|
Glass wool |
|
|
8 |
Pneumatic percussion hammer |
SK40 |
2 sets |
AL |
|
|
Dedusting system |
|
1 |
Cyclone separator |
XF170 |
1piece |
SUS304 |
|
|
2 |
Discharge valve |
|
1piece |
SUS304 |
|
|
3 |
Charging basket |
|
1piece |
SUS304 |
|
|
4 |
Air hose |
Open type |
1set |
SUS304 |
|
|
Control system |
|
1 |
Control cabinet |
|
1set |
SUS304 |
|
|
2 |
PLC programming |
LG |
1set |
|
|
|
3 |
Touch panel |
EV |
1set |
|
|
|
4 |
Contactor component |
Chengtai |
1set |
|
|
bio-equip.cn
Nanjing Xianou Instruments Manufacture Co.,Ltd. is a special lab instruments manufacturer which is located in Maixiang Science Park, Xixia Area, Nanjing City, Jiangsu Province, and it’s comprised with high level intellectuals who are very young and full of innovation ideas.
After the foundation, Xianou is devoted to the producing and selling of laboratory instruments, including lab’s sample processing equipments and high-low temperature instruments such as microwave and ultrasonic combined reaction system, ultrasonic cell crusher, cryogenic thermostat bath, cryogenic cooling liquid circulator, high-temperature oil bath, ice maker, Xianou possesses abundant technical force and professional technicians.
中文
