Home >Products> Reagents >ELISA / Diagnostic Kits> Mouse ovary Organoid Culture Kit
Reagents:  Molecular Biology   Biochemistry   Cell Biology   ELISA / Diagnostic Kits   Antibody   Serum/Medium   Other Reagents  
Mouse ovary Organoid  Culture Kit
Mouse ovary Organoid Culture Kit
Place of Origin:
Singapore
Brand:
Absin
Model:
abs9754-1kit
Price:
1083
Hits:
12 
Updated:
9/1/2025
  • Product Detail
  • Company Profile

    Product Specification

    Usage1. Primary
    (1) the normal ovarian tissue of mice after sampling must be cleaned at 2 - 8 ℃, several Petri dishes should be prepared, and primary culture buffer B pre cooled at 4 ℃ should be added for standby (double antibody and gentamicin should be added)
    (2) put the tissue into the culture dish, wash it with primary culture buffer B for three times, and then cut the tissue into a tissue block with a volume of about 1-3 mm3using ophthalmic scissors or scalpel
    (3) the tissue was digested with the digestive juice C of mouse normal ovary primary tissue, and then was shaken at 37 ℃ for 15-20 min. (the digestion condition was observed at any time during the digestion process)
    (4) take a small amount of liquid and observe it under the microscope. After observing more single cells or cell clusters below 70UM under the microscope, add three times the volume of primary culture buffer B to stop digestion
    (5) filter with a 100um pore size screen, collect the filtrate, remove the supernatant after centrifugation at 300g for 5min, add primary culture buffer B and resuspend for centrifugation
    (6) Matrigel calculation: after step 6, observe the collected tissue volume, add 25-30 times the tissue volume of Matrigel (abs9495) to resuspend the plate
    (7) take a 24 well cell culture plate as an example, dispense 25ul of tissue Matrigel mixture per well for plating (operate at 4 ℃)
    (8) put the laid culture plate into a 37 ℃ incubator for 10-15min to form glue, and add mouse normal ovarian organoid medium a (restore room temperature) for culture
    2. Organoid subculture
    (1) pipette the culture medium, add 1-2ml of 4 ℃ organoid subculture buffer g to each well and place it for 2min
    (2) pipette the Matrigel gently, collect it in a 15ml centrifuge tube, and let it stand at 4 ℃ for 10min. (each 6-8 well is a group)
    (3) a: the number of organoids is insufficient or the volume is small: centrifuge for 5min to discard the supernatant, add an appropriate amount of organoid subculture buffer g to resuspend and transfer into a 1.5ml centrifuge tube, centrifuge for 5min at 300g to discard the liquid for step 4
    b: When the number of organoids is large or the volume is large: centrifuge for 5min to discard the supernatant, add an appropriate amount of organoid passage digest D for digestion for 2-3min, add organoid passage culture buffer g to stop digestion, centrifuge for 5min to discard the mixture, add an appropriate amount of organoid passage culture buffer g to resuspend and transfer into a 1.5ml centrifuge tube, centrifuge for 5min at 300g to discard the liquid for step 4
    (4) after organoid collection, add Matrigel to resuspend, lay 25ul Matrigel per well in a 24 well cell culture plate, place in the incubator for 10-15min, and add 500ul mouse normal ovarian organoid culture medium a
    3. Organoid cryopreservation
    (1) pipette the culture medium, add 1-2ml of 4 ℃ organoid subculture buffer g to each well and place it for 2min
    (2) pipette the Matrigel gently, collect it in a 15ml centrifuge tube, and let it stand at 4 ℃ for 10min. (each 6-8 well is a group)
    (3) centrifuge for 5min to discard the supernatant, add an appropriate amount of organoid subculture buffer g to resuspend, and centrifuge for 5min at 300g to discard the liquid
    (4) add an appropriate amount of organoid cryopreservation solution F, gently blow and resuspend. Take a 24 well cell culture plate as an example: the density is 2 wells and 1 tube is frozen, with a volume of 1.4ml per tube
    (5) mark the information, and after cooling down the program, transfer it to liquid nitrogen for long-term storage
    4. Organoid resuscitation
    (1) take 10ml of organoid subculture buffer g and put it into a 15ml centrifuge tube
    (2) take out the frozen organoid cells from the liquid nitrogen tank and quickly put them into a 37 ℃ water bath pot for melting
    (3) during the water bath thawing process, it is necessary to gently shake the freezing tube to ensure that the frozen solution is completely thawed in 1-2min
    (4) quickly transfer the dissolved organoid cells to a 15ml centrifuge tube, gently blow 6-8 times with a pipette, centrifuge at 300g for 5min, and then remove the supernatant and collect the organoid cell pellet. Add an appropriate amount of organoid subculture buffer g to resuspend and transfer into a 1.5ml centrifuge tube. Centrifuge for 5min at 300g
    (5) resuspend Matrigel, lay 25ul Matrigel per well in a 24 well cell culture plate, place in an incubator for 10-15min to form a gel, and add 500ul of mouse normal ovarian organoid culture medium a.
    DescriptionComposition:
    NameSpecification
    Mouse normal ovarian organoid medium A100ml
    Primary culture buffer B250ml
    Mouse ovary primary tissue digestive juice C30ml
    Organoid passage digestive juice D30ml
    Tissue preservation solution E100ml
    Organoid cryopreservation fluid F20ml
    Organoid subculture buffer G250ml
    Storage Temp.4° C. 3months; -20° C. 1 year, see label for details
    bio-equip.cn
    AntBio is a biotechnology group company dedicated to serving life sciences, aiming to help scientists accelerate research and improve work efficiency. AntBio provides comprehensive and high-quality reagent tools for basic research, drug development, and diagnosis, including research grade antibodies, proteins, biochemical reagents, and assay kits. These research tools are widely used in different segments of life science research. The group company currently consists of three brands, Absin, Starter-Bio and UA-Bio.
Request Information
Request Information: yes no
Request Quotation: yes no
refresh

I agree to share my inquiry with the other matching suppliers.

Request Information

* Name:
Job Title:
* Tel:
Fax:
* E-mail:
Postcode:
Institution/Company:
Address:
* Country:
Request Information:
yes no
Request Quotation:
yes no
* Message:
* Verification Code:
refresh
I agree to share my inquiry to the other matching suppliers.