Heating Magnetic Stirrer with optional Bracket and Thermometer

Magnetic stirrer is a laboratory instrument for liquid mixing, mainly used for stirring or simultaneously heating and stirring low-viscosity liquid or solid-liquid mixture.
While stirring the liquid, combined with the heating temperature control, it can heat and control the sample temperature according to the specific experimental requirements, maintain the external conditions required by the experimental conditions, and ensure that the liquid mixing or solid-liquid mixing meets the experimental requirements.

Product Illustration

power interface, power switch, temperature knob, speed knob, heating plate

Technical Parameters
Power supply: AC220v
Speed range: 100-1500rpm
Thermal output power: 300w
Motor power: 20w
Temperature control range: RT-150 ℃
Heating plate diameter: 120mm
Max length magnetic bar: 60mm

Operating Instructions
Before using this instrument, please read this manual carefully, familiarize yourself with the functions of each button on the panel, and keep it in a safe place for your convenience.
Check it out when needed.
5.1 Plug in the power cord(plug) and connect to the 220V power supply;
5.2 Turn on the power switch, and set the required speed and time according to the experimental requirements;
5.3 Turn the temperature knob to the corresponding number to set the temperature, turn it to the left to decrease the temperature, and turn it to the right to increase the temperature. 
5.4 Rotate the speed knob to the corresponding number to set the speed, turn it to the left to decrease the speed, and turn it to the right to increase the speed.
5.5 At the end of use, turn off the speed/temperature knob first, and then turn off the power switch.

Points for Attention
6.1 The instrument is used indoors, the ambient temperature is 0-45 degrees, and the humidity is less than or equal to 80%
6.2 The instrument should be placed on a flat and stable platform. Keep the instrument dry and clean.
Note: If organic matter falls on the heating plate, it needs to be cleaned immediately before use!
6.3 There is no vibration or strong air flow around the instrument that affects normal use. If there is strong air flow, it will affect the heating effect and accuracy.
6.4 There is no flammable and explosive gas and dust around the instrument.
Note: This instrument is not an explosion-proof model!
6.5 Strictly forbidden to plug and unplug the power supply and press the switch when there is liquid on your hands.
6.6 Strictly forbidden to maintain the instrument in the power-on state. If the instrument fails, please contact the manufacturer in time. Tel: +86-532-84119871