中文
Fermenters | Bioreactors:
Fermentors
Bioreactors
- Mammal Cell Bioreactor Vaccine Fermenter
- Product Detail
- Company Profile
Material: 316L stainless steel inside and 304 jacket
The diameter and height ratio: 2:1.5
Sterilization method: on-site sterilization auto control or manual control
Control system: Siemens PLC, industrial LCD touch computer control, parameters can be set to store,can be remotely connected to the computer through the USB interface, the data
Stirring system
Top stirring, double mechanical seal, including condensed water seal tank, 0.2um asepsis steam filter, air pressure protection pipe and valve group, sterilizing pipeline and diaphragm valve group, steam trap group
Speed control: 20L:30-300 r/min, resolution 1 rpm, control precision ±1rpm
Temperature detection and control
Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), auto control (cooling water+5℃) to 65℃±0.1℃,temperature probe(PT100)
pH detection and control
2.00-12.00±0.05 pH, autocontrol by adding acid and base, pH sensor (Mettler/Hamilton, Switzerland) and shielding lead (Mettler/Hamilton, Switzerland). fermenter is auto controlled with peristaltic pump
N2 by pass system
Electromagnetic valve and variable area flow meter automatic control nitrogen mix with air
Inlet O2 by pass
Electromagnetic valve and variable area mass flow meter control the flow rate of O2 and air to adjust the DO
Inlet CO2 by pass
Electromagnetic valve and variable area mass flow meter control the flow rate of CO2
Air inlet system
Auto control by mass flow meter, with two kinds of deep ventilation and surface ventilation mode, ventilation system: micro bubble ventilation system, air inlet filter, exhaust filter (need to be equipped with electric heating set), exhaust condenser, top blowing device
DO detection and control
0-150±3% displaying precision 0.1%, sensor (Mettler/Hamilton, Switzerland) and shielding lead(Mettler/Hamilton, Switzerland)
Feed control
Uses peristaltic pump (Spriax, UK) to add materials
Anti-foam control
Tested by sensor and added anti foamer by peristaltic pump
Intake control (air) manual control rota meter
Load cell
Have load cell (Mettler,Switzerland)
Lid lift: Have lid lift system
Harvest valve: Zero dead leg flush bottom valves,can be sterilized separately, manual
Sampling valve: At the low side of vessel,can be sterilized separately
Exhaust: Condenser before the exhaust, exhaust controlled by diagram valve
Flow test and pressure test system
Variable area flow meter manually controls the inlet flow. Pressure transmitter automatically display the tank pressure, pressure control range: 0-0.3 Mpa, pressure gauge display.
Pipeline and valve
The pipelines and valves which are in contact with the fluid are made by 316L stainless steel, the valves are diaphragm cell valves
Our Factory in China.
We provide the fermentor products including : Stainless steel fermenter, Pilot combo stainless steel fermentor,glass fermentor,fermenter, Multi-Union fermenter,Multi-stagefermentation tank,and shaking Incubators, positive join stainless steel fermentor.
The diameter and height ratio: 2:1.5
Sterilization method: on-site sterilization auto control or manual control
Control system: Siemens PLC, industrial LCD touch computer control, parameters can be set to store,can be remotely connected to the computer through the USB interface, the data
Stirring system
Top stirring, double mechanical seal, including condensed water seal tank, 0.2um asepsis steam filter, air pressure protection pipe and valve group, sterilizing pipeline and diaphragm valve group, steam trap group
Speed control: 20L:30-300 r/min, resolution 1 rpm, control precision ±1rpm
Temperature detection and control
Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), auto control (cooling water+5℃) to 65℃±0.1℃,temperature probe(PT100)
pH detection and control
2.00-12.00±0.05 pH, autocontrol by adding acid and base, pH sensor (Mettler/Hamilton, Switzerland) and shielding lead (Mettler/Hamilton, Switzerland). fermenter is auto controlled with peristaltic pump
N2 by pass system
Electromagnetic valve and variable area flow meter automatic control nitrogen mix with air
Inlet O2 by pass
Electromagnetic valve and variable area mass flow meter control the flow rate of O2 and air to adjust the DO
Inlet CO2 by pass
Electromagnetic valve and variable area mass flow meter control the flow rate of CO2
Air inlet system
Auto control by mass flow meter, with two kinds of deep ventilation and surface ventilation mode, ventilation system: micro bubble ventilation system, air inlet filter, exhaust filter (need to be equipped with electric heating set), exhaust condenser, top blowing device
DO detection and control
0-150±3% displaying precision 0.1%, sensor (Mettler/Hamilton, Switzerland) and shielding lead(Mettler/Hamilton, Switzerland)
Feed control
Uses peristaltic pump (Spriax, UK) to add materials
Anti-foam control
Tested by sensor and added anti foamer by peristaltic pump
Intake control (air) manual control rota meter
Load cell
Have load cell (Mettler,Switzerland)
Lid lift: Have lid lift system
Harvest valve: Zero dead leg flush bottom valves,can be sterilized separately, manual
Sampling valve: At the low side of vessel,can be sterilized separately
Exhaust: Condenser before the exhaust, exhaust controlled by diagram valve
Flow test and pressure test system
Variable area flow meter manually controls the inlet flow. Pressure transmitter automatically display the tank pressure, pressure control range: 0-0.3 Mpa, pressure gauge display.
Pipeline and valve
The pipelines and valves which are in contact with the fluid are made by 316L stainless steel, the valves are diaphragm cell valves
Our Factory in China.
We provide the fermentor products including : Stainless steel fermenter, Pilot combo stainless steel fermentor,glass fermentor,fermenter, Multi-Union fermenter,Multi-stagefermentation tank,and shaking Incubators, positive join stainless steel fermentor.
Our advantages:
1. Good price good quality with beautiful shape.
2. Stable availability, complete specification.
3. MOQ 1unit.
4. The strong support of advanced technology and detection capability.
5. ISO /CEcertification.
6. Reliable factory, established since 1998.
7. Professional service and technology support.
2. Stable availability, complete specification.
3. MOQ 1unit.
4. The strong support of advanced technology and detection capability.
5. ISO /CEcertification.
6. Reliable factory, established since 1998.
7. Professional service and technology support.
FAQ
Q: What's your MOQ?
A: 1 unit.
Q: Do you accept OEM ?
A: Yes.
Q: Are you manufacture of fermenter/bioreactor?
A: Yes.
Q: Do you provide after sales service, training and installation?
A: Yes.
Q: Have warranty or not?
A: Yes, have 1 year international warranty.
Warmly welcome to inquire service@fermentertech.com
Or Call tel +86-134 7276 8136(whatsapp).
Or Call tel +86-134 7276 8136(whatsapp).
-
We are a leading Fermenter/Bioreactor manufacturer and supplier from China since 1998.
We accept customize up to your special requirements,
One of our factory located in Shanghai, warmly welcome you visit our factory.
Our product: Glass Fermenter, Stainless Steel Fermenter
Capacity: Mini 0.1L to pilot 500L to industrial 500tons
Application: Vaccine Production, Microorganism Culture (Bacterial, Fungi, Yeast.etc)
Mammalian Cell, Plant Cell, Algae, Enzyme, Protein, Additive Production, etc.
| Request Information |
| Other Products |
| Related Products |
