Mainly designed for automatic filling and dispensing machine.
304sst housing has good corrosion resistance.
Controller FC32S-1 and dispensing system FU4B-1 are separated, to allow flexible mounting way.
Each dispensing unit has four channels.
With Modular structure, one controller can control 32 channels (8 units).
Controller adopts 7 inch industrial touchscreen interface to operate easily and friendly.
Each channel has independent membrane key and LED display, which can be used to set the channel address and calibrate the dispensing volume when system is running or stop.
Main Functions and Features:
- Control mode: Off-line (Controller FC32S-1 control), On-line (external signal control or communication control)
- Start/stop control signal input: 1 switch signal for each dispensing unit
- No bottle signal input: 4 swithc signals corresponding to 4 channels for each dispensing unit.
- Communication function: RS485 communication interface, Modbus protocol, communication parameters. (address, baud rate, parity, stop bit) can be set through touchscreen.
- Dispensing calibration: Dispensing volume of every channel can be calibrated through percentage, volume, weight or average weight method.
- Channel enable: Every channel can be set as enable or disable.
- Fill/Backflow: All the channels can be set as enable or disable.
- Channel address: Communication address of each channel can be set through independent membrane key and displayed on independent LED.
- Password function: Protect the system parameters and prevent misoperation through the password function
- Dipensing parameter set: Dispensing parameters can be saved as a parameter set which can be invoked easily without reset it.
Technical Specifications:
- Flow rates: 85.7 - 2571.4 ml/min
- Speed: 300-3000 rpm
- Speed accuracy: ±1.0%
- Speed resolution: 1.0 rpm
- Communication interface: RS 485
- Diameter of particle in liquid: ≤10μm
- Max. outlet pressure: MG204 - 0.8Mpa, MG209 - 0.8Mpa, MG213 - 0.3Mpa
- Liquid temperature: -45 to 50℃ with PTFE gear, -45 to 120℃ with PEEK gear
- External control: Start/stop control, speed control(0.5-5V, 1-10 V, 4-20 mA, 1-10 kHz optional)
- Fluids viscosity: ≤ 200 cst
- Power supply: AC90-130V/176-264V, 50Hz/60Hz
- Power consumption: ≤50 W
- Operating condition: Temperature 0 to 40℃, Relative humidity <90% (no dew)
- Drive weights: 2.83 kg
- Drive dimensions (L×W×H): 232×142×149(mm)
- IP rating: IP31
Other Parameters:
|
Model
|
Product
Code
|
Pump Head |
Ref. Dispensin
Volume (ml)
|
Tubing |
Ref. Dispenin
Time (s)
|
Precision |
Dispensing
ID (mm)
|
Productivity
(pcs/min) |
| FU4B-1&FC32S-1 |
Dispensing System
FU4B-1(05.11.02A)
Controller
FC32S-1(05.49.27A)
|
YZ1515x
YZII15
FG15-13 |
0.3-0.5 |
13# |
1-1.2 |
≤±2% |
≤0.5 |
27-30 |
| 1.0-2.3 |
14# |
≤1.0 |
| 2.6-5.1 |
19# |
≤1.5 |
| 4.6-9.1 |
16# |
≤2.0 |
| 10-19 |
25# |
≤3.0 |
| 15-30 |
17# |
≤3.0 |
| YZ2515x |
8.0-17 |
15# |
≤3.0 |
| 12-24 |
24# |
≤3.0 |
| YZII25 |
8.5-17 |
15# |
≤3.0 |
| 15-24 |
24# |
≤3.0 |
| 18-36 |
35# |
≤3.0 |
| 25-48 |
36# |
≤3.0 |
| FG25-13 |
9-17 |
15# |
≤3.0 |
| 12-24 |
24# |
≤3.0 |
| DMD15-13 |
0.1-0.9 |
2*13# |
≤0.5 |
| 0.2-2.3 |
2*14# |
≤1.0 |
| 0.5-5.9 |
2*19# |
≤2.0 |
| 2.0-1.0 |
2*16# |
≤3.0 |
| 5.0-25 |
2*25# |
≤3.0 |
bio-equip.cn
中文
