NANOJ   EX 05  Membrane    extrusion is mainly used to make pharmaceutical products uniform particle size, removing the particles and precipitation in product, reducing the particle size of the liposomes and emulsions , facilitate research sterile filtration and dynamics of molecular biological!

        The ATS EX 05 exturder /liposomes extruder can be used to combine with high pressure homogenizer ATS AH-2010, .AHBASIC, AH-PILOT, AH-08 and other models high pressure homogenizer, coupled with 100nm or 200nm filtration membrane，，You can do high pressure homogenization + filter!

        The extrusion system uses a jacketed temperature control design, the jacket temperature control system can target specific nature of the material and direct heating or cooling of the material, So that products can be evenly through the filter and refine the particle size, Suitable for processing high viscosity products. For example, liposome with sugar, cannot be used directly homogenized by EX-5 LIPOSOMES extruder under room temperature, the material must be heated to a melting certain extent, can be homogenized by membrane! The device comes with a jacket temperature control design, make the process more convenient and efficient operation!
    The extrusion system comes standard 100nm-microporou membrane, membrane can not only make liposomes uniform to smaller particle size, and may play a role in sterilization, because the pore diameter is small enough to be direct filtration of bacteria!

​  

NANOJ EX5 membrane extruder has the following characteristics:

u EX5 liposomes extruder can single joint use, or you can double joint, quadruple use.

u Use a polycarbonate liposomes membrane, convenient operation, membrane pore size can be selected by need

u Strictly control product particle size, can be a single operation or cycle operation

u Preset pressure protection valve, Maximum pressure up to 200bar

u Can be used for high concentration samples process, Extrusion temperature control device is equipped with in front and rear, can effectively control the temperature of the sample

u All piping in contact with the materials are 316L stainless steel

u All component materials include O-ring、gaskets etc approved by FDA

u All contact membrane surfaces are made of electrolytic polishing treatment, Minimum polishing reaches 15Ra (All well above the polishing degree requirements)

u Can be used in a clean room, conform to GMP standard

u Convenient loading and unloading, easy cleaning and sterilization

 a part of Most famous​ Customer List​：

.China Pharmaceutical University
2.Shenyang Pharmaceutical University
3.Kelun Group
4.Jiangsu Hengrui Medicine Co., Ltd.,
5.Yangtze River Pharmaceutical Group
6.CSPC Pharmaceutical Group Limited
7.Shanghai Pharmaceuticals Holding Co., Ltd.
8.Tsinghua University
9.Peking University
10.HISUN
11.china tai tianqing

12.Hebei Tiancheng Pharmaceutical Co., Ltd

Almost all the domestic universities,and Large pharmaceutical companies

 

ATS Industrial Co. Ltd is a professional high pressure homogenizer (high pressure cell crusher) supplier, Switzerland Jetpharma superfine jet mill and other micro processing equipment! Especially high pressure cell crusher is widely used in biological industry!
Broken pure machinery, in the cooler system, large flow efficiently broken. Is the biotechnology industry of essential production tool!
ATS is a professional high pressure homogenizer suppliers and service providers;
ATS Industrial Systems Co., Ltd. was founded in 1998 in BVI, Canada SEEKER industrial company pharmaceutical equipment suppliers;
In 2000 to open an office in Shanghai, has been committed to the introduction of advanced homogeneous, crushing, emulsion preparation equipment;
In 2001 ATS Chinese sales in the first high pressure homogenizer;
2004 is the first one liposome production line to provide high pressure homogenizer;
In 2006 ATS introduced the homogenizing machine design and technology the most advanced in Europe; the parts of Europe's premier, Shanghai in the development of AH100 series high pressure homogenizer, obtained the customer's wide acclaim!
In 2006 December established a technical support center in Shanghai.
Also in 2007 the introduction of the high-pressure homogenization machine series products in AH-PLIOT, at the same time for drug class customers, special requirements and bio pharmaceutical customers, develop high pressure homogenizer specifically with the corresponding!
Over the years, ATS bearing support and trust of the users; has the firm for the Chinese customers to develop new formulations of the direction of the device, we bear in mind that quality is the life of enterprise, innovation is the pillar; will reward customers with excellent quality and perfect after sale service!