Company IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionCompany IntroductionThe stirrer is driven by brushless DC motor, with features of high efficiency; minimal temperature rise, long-time work available.

Specification:
Power: AC110 ~ 240V 50HZ
Stirring time: 1~99 seconds
Acceleration and deceleration time: 2 to 12 seconds
Stirring speed: 40 ~ 450 r / min
Time to stop: 1 to 99 seconds

Installation:
First, fit the column with three sets of screws & nuts in the base (with nuts and washers below); then installed the control box on the right column and screw tightly; thirdly, install the electrical rail in cross burl of the column and with location adjusted; get the pin and plug into the socket in the control box;

Operation:
Time set: four finger-touch switch t1- rotating; t2-stop; t3 –reversal; t4 – stop; a cycle time of the procedure and different time set according to your need.
Acceleration knob can control the acceleration and deceleration speed. Acceleration and deceleration time is short with clockwise stressing. Acceleration and deceleration time is long with counter-clockwise stressing.
Speed settings: At the first, t1 and t3 for a little longer; then, when it is transferred into the process after start-up, clockwise adjust the knob for stirring speed setting; the same way with the reversal stirring speed setting. After the speed setting, set t1 and t3 to the time required.

NOTES:
Socket should have a good grounding;
T1 and t3 can not be too short while acceleration and deceleration at a longer time; Or the speed will not be set or stop;
Every screw should be tightened installation.

Packing:
a control box; a set of electrical motor (including bar); a set of three columns (including cross burl); 3pieces M10 screw; 3pieces M10 nut; 3pieces Φ10 pads, one wrench, one base; one Φ8 × 380 stirring rod;

Our company was established by engineers with over 30 years of experience in Shanghai, and we are specialized in production and development of stirrer. Currently, we produce various models of stirrers and muddlers.

Our products include homothermal stirrer with independent stirring, heating functions. We also produce stirrers with multi service positions, dual directional stirring, large capacity, extremely large capacity, high viscosity stirring and high temperature stirring features.

Our products can satisfy requirements presented by domestic academic institutes, research institutes, biological, pharmaceutical, foodstuff, agriculture, environmental protection, medical, chemical and other industries.

In addition to develop new models of stirrers, we made continuous improvements to various existing models. Accordingly, better structure, exterior appearances and application effects were achieved. The company devoted great efforts to technological investment and optimization of resources. The production scale of the company expanded, technology innovated and product quality promoted continuously over the years. With continuous progress in technological aspects, our company may undertake custom-made services for individual clients.

With high quality, strong technological power and good after sale services, products of our company have been exported to India, Mongolia, Malaysia, Taiwan, Hong Kong and other countries and regions. We sincerely welcome overseas and domestic clients purchase our products.