Login    Join free Add to favorites    中文
Home >Products> Sample Processing >Homogenizers / Milling> Seed Grinder
Seed Grinder
Seed Grinder
Origin of place China
Model JFSO-100
Supplier Zhejiang TOP Cloud-agri Technology Co., Ltd
Price
Hits 745
Updated 3/1/2022
  • Product Detail
  • Company Profile

Product Name: Seed Grinder

Model: JFSO-100

 

Introduction

JFSO-100 Grinder is an instrument which makes use of the fast cutting made by rotational blade’s fast revolve and fixed blade, and can quickly make samples into powder. It has the advantages of high efficiency, simple operation, continuously smashing samples, even fineness degree of smashing. The fineness degree of smashing can be controlled by changing sieve and adjusting the distance between fixed blade and smashing chamber through adjusting screw. The instrument is widely used for smashing processing of samples such as rough rice, wheat, corn, beans and so on.

 

Specification

Voltage: 220V+-10V  50HZ

Power: 180W

Rotational speed: 1400 r/min

Inside diameter of work room: 100mm

Hardness of blade: 35-40HRC

Diameter of mesh: 1.5mm

Max weight: 50g

Shape size: 28*12*28cm

Gross weight: 14kg

 

Operation

Take sample 50g, remove its impurities, put it into the hopper. Then turn on the power. When the machine works normally, pull out the baffle. The sample will fall into work chamber gradually. After that, close the baffle. The sample goes into sample container through sieve after cutting made by rotational blade’s fast revolve and fixed blade. Power off when the sample is completely smashed. Take out the smashed sample for test. For testing wet gluten content of wheat flour, choose sieve with diameter of 0.6mm. According to GB/T14608-93 “wheat flour wet gluten test method”, take wheat sample 100g, smashed by grinder, make the sample through sieve with CQ16(41 mesh) account for more than 95%, thus the sieving powdery sample can be used for wheat flour gluten content test.

 

Attentions

1. Put the sample evenly, not so quick or put all at a time.

2. After finishing operation, cut off the power and check the smashed sample.

3. Keep the work chamber clean, clean it after using.

4. When you turn on the power switch, if there is any crashing noise made by the blade and the shell of the machine, please cut off the power at once and repair

bio-equip.cn
Request Infomation

* Name:
Title:
* Tel:
Fax:
* E-mail:
Postcode:
Institution/Company:
Address:
* Country:
Request infomation:
yes no
Request Quotation:
yes no
* Message:
Validated Code:
refresh
I agree to share my inquiry to the other matching suppliers.



Recently viewed products
Copyright(C) 2006-2025 Bio-Equip    E-mail:web@bio-equip.cn   沪ICP备06040519号