The Aflatoxin Quantitative Rapid Test Kit & Analyzer is an integrated rapid testing system combining professional test strips with a dedicated reading instrument for aflatoxin detection.
 
It is specifically developed for large-scale, on-site screening and routine quality control of commodities commonly used in Europe and Africa, including but not limited to:
• Corn
• Wheat
• Maize
• Rice
• Peanuts
• Animal feed
• Selected herbal materials
 
The system enables fast decision-making at grain silos, feed mills, warehouses, and inspection points without reliance on centralized laboratories.
 
Key compliance & performance highlights:
• Fully compliant with EU Maximum Residue Limits (MRL)
• Validated against LC-MS/MS reference methods
• Strong correlation with laboratory results
• Suitable for both quantitative and qualitative analysis
• Proven through long-term, high-volume global use
 
⸻
 
Key Advantages — What Makes This System Different
 
✅ On-Site, Large-Scale Screening Capability
• Results in 5–10 minutes
• Designed for batch screening at:
• Grain silos
• Feed mills
• Warehouses
• Ports & export inspection points
• Ideal for high-throughput decision-making
 
⸻
 
✅ EU Standard & LC-MS/MS–Validated Performance
• Fully aligned with EU MRL requirements for aflatoxin
• Performance validated and benchmarked against LC-MS/MS
• Reliable for regulatory screening, internal QC, and export compliance
 
⸻
 
✅ Quantitative & Qualitative Detection
• Supports quantitative result reading via analyzer
• Enables risk grading, not just pass/fail decisions
• Suitable for on-site screening + laboratory confirmation workflow
 
⸻
 
✅ Proven by Tens of Millions of Tests
• 20+ years of rapid test manufacturing expertise
• Tens of millions of batches tested worldwide
• Selected for Olympic Games, Asian Games, and large-scale food safety programs
• Long-term validation far beyond most manufacturers
 
 
✅ Cost-Effective & Easy to Operate
• No complex laboratory instruments required
• Minimal training needed
• Significantly reduces routine LC-MS/MS testing frequency and cost
 
 
⭐ Brand Trust Endorsement
 
Proven Beyond the Laboratory — Trusted by the Real World
 
Unlike many suppliers whose aflatoxin testing equipment is only validated under limited laboratory conditions or no validation, our Aflatoxin Quantitative Rapid Test System has been proven through tens of millions of real-world tests across global grain, feed, and food safety systems.
 
With over 20 years of dedicated rapid test manufacturing experience, our solutions have been selected for national food safety programs and major international sporting events, including the Olympic Games and Asian Games — environments where accuracy, stability, and zero tolerance for error are mandatory.
 
This level of long-term, high-volume validation clearly distinguishes us from ordinary manufacturers.
We are not just providing a detector or analyzer — we are delivering a globally proven food safety solution.
 
⸻
 
 Application Fields
•  Grain & cereal screening (corn, wheat, maize, rice, peanuts)
•  Feed mills & raw material intake inspection
•  Export & import quality control
•  Laboratories & third-party testing centers
•  Government & large-scale food safety programs
 
⸻
 
 General Technical Specifications
 
Item Description
Detection Type Quantitative & Qualitative
Target Aflatoxin
Detection Time 3–5 minutes
Performance Validated against LC-MS/MS reference methods
Compliance EU MRL, CE, ISO
Sample Types Grains, feed, herbs
Storage 4–30°C
Shelf Life 15 months
 
 
  Store at room temperature(4-30℃).
DO NOT FREEZE or use beyond the expiration date.
The shelf life is 15 months.

KIT CONTENTS
-SmarKIT Total Aflatoxin Rapid Test (40/50 tests /kit)
-Plastic dropper (40/50 pieces /kit)
-PBST Buffer (1 bottle/kit, 30ml)
-Buffer A (1 bottle/kit, 15ml)
-Packing Insert (1 set /kit)

TEST PROCEDURE
Read the entire procedure carefully before performing any test.
Keep the test kit and reagent at room temperature(20℃~30℃) before testing.

1. Prepare samples according to chapter 7 (Sample preparations).
2. Remove the Total Aflatoxin Rapid Test from sealed pouch.
3. Hold the dropper vertically and transfer 3 full drops(around 100µL) of solution to the specimen well (S) and then start the timer.
4. Wait for red bands to appear. The result should be read in approximately 3-5 minutes. Do not interpret results after 5 minutes.

Reading results
Negative:
The Test Line (T) is the same as or darker than the Control Line (C). It is negative.
POSITIVE:
The Test Line (T) is lighter than the Control Line (C), or there is no Test Line. It is positive.

INVALID: Reference Line fails to appear.
Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for an invalid result.

NANKAI Biotech develops and manufactures rapid testing solutions for real-world food safety risk control.

For more than 20 years, we have focused on fast, practical and reliable rapid screening technologies that help regulators, laboratories, distributors, exporters and food industry QC teams make faster food safety decisions.

NANKAI provides rapid screening and quantitative analysis solutions for pesticide residues, mycotoxins, illegal additives, aquaculture & seafood safety, veterinary drug residues, antibiotics, heavy metals & toxic elements, digital QC, traceability systems and related food safety applications.

What differentiates NANKAI is the combination of large-scale manufacturing, certified analytical laboratory verification and extensive real-world deployment experience.

We operate three CMA, CATL & CNAS certified analytical laboratories equipped with LC-MS/MS and GC-MS/MS platforms, supporting matrix verification, reference method comparison, rapid test performance evaluation and accredited third-party analytical testing services.

Our rapid testing solutions have been applied in Olympic-level food safety programs, major international events, government monitoring projects, grain & feed safety workflows, fruit & vegetable screening, tobacco & tea quality control, seafood and meat safety supervision, traditional herbal material testing, dairy and honey safety programs, factory QC and export risk-control workflows.

Highlights:
• Fast, practical and reliable rapid screening solutions
• 20+ years of rapid testing technology development
• 25,000+ m² manufacturing & laboratory facilities
• Three CMA, CATL & CNAS certified analytical laboratories
• LC-MS/MS & GC-MS/MS analytical capability
• Olympic-level and government project experience
• Billions of real-world screening applications
• Food safety monitoring, traceability and digital regulatory systems

NANKAI Biotech supports international partners with practical, scalable and laboratory-verified rapid testing solutions for food safety risk control.