Standard Type Coating Thickness Gauge CM-8825FN
Applications:
Standard Type Coating Thickness Gauge CM-8825FN has two measuring methods.
Measuring method:F probe
Coating:
*paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome
etc.(non-magnetic materials)
*alvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer,
copper tile, aluminium tile, some alloy tile, paper etc.
Base:iron, nickle etc.(magnetic materials)
Measuring method:N probe
Coating:anodizing, varnish, paint, enamel, plastic coatings,
powder,etc.(non-conductive coatings)
Base:aluminum, brass, non-magnetic stainless steel, etc(non-magnetic materials)
Features:
* Two measuring methods: magnetic induction (F) and eddy current (N)
* Two measurement mode: Single and Continuous
(Notice:Continuous mode is convenient to measure the coating
thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the
substrate.
* Operation process have buzzing reminder,while no buzzing in
continuous mode.
* Use USB data output and RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
* Integral Type suitable for single-hand operation, large probe with
large contact surface have better stability,users can get
continuous,good repetitive and precise measurements.
For rapid quotation,please contact Lisa directly :
To Lisa email: lisali0428@outlook.com
skype: lisali0428@outlook.com
Details:
| Operating Principle |
Magnetic Induction / Eddy Current (F / NF) |
| Measuring Range |
0~1250 um / 0~50 mil |
| Resolution |
0.1 um / 1 um |
| Min. Radius Workpiece |
F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm |
| Min. Measuring Area |
6 mm |
| Min. Sample Thickness |
0.3 mm |
| Accuracy |
± 1~3%n or ± 2.5 um |
| Auto Power Off |
|
| Metric / Imperial |
Convertible |
| Battery Indicator |
Low Battery Indicator |
| Operating Conditions |
Temp. 0~40 °C, Humidity: 10~90 %RH |
| Power Supply |
4 x 1.5 V AAA (UM-4) Battery |
| Dimensions |
126 x 65 x 27 mm |
| Weight |
81 g (Not Including Batteries) |
Accessories:
Standard Accessories:
1. Main Unit
2. Calibration Base Set (F Type / NF Type) CTG-BS
3. Calibration Foils CTG-CF (1 set, 4 pieces)
4. Carrying Case
5. Operation Manual
Optional accessories:
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software
For rapid quotation,please contact Lisa directly :
To Lisa email: lisali0428@outlook.com
skype: lisali0428@outlook.com
中文
