Specially designed for the medical profession to make soft frozen saline or other preferred solution for regionalhypothermia for surgical or emergency procedures, and transportation of transplant organs. This compact freezer is self-contained and portable, easy to operate, and offers continuous production of soft formable ice. No additional support equipment is required. Stainless steel basin meets standard hospital specifications. To operate, pour heat transfer solution, with a freezing point below -35º F (-37º C), in the outer basin. Add the desired amount of sterile solution to the inner basin and press the control switch On. When slush begins to form, simply scrape and stir the solution. As slush is used, just replace with an equal volume of sterile solution to continue freezing.
8 liter volume. Easily removed for sterilization.
Press the control switch to start refrigeration. A light indicates the unit is freezing. Press the control switch again to terminate the refrigeration process.
Two scrapers are provided with each unit, to scrape the slush from the basin wall and remove the slush from the basin. The scrapers are made of a durable plastic, and may be gas sterilized or autoclaved.
Standard casters and hand grips allow the unit to be easily moved into place. Two casters have locking devices to keep the unit in place.
Product introduction
Surgical slush freezer is designed for continuously producing a type of soft slush without pointed flake slush. For instance, it is used in emergency surgeries for transporting organs transplanted at low temperature, extracorporeal circulation surgeries for myocardial protection, organ transplantations, internal fixation of patella, renal parenchyma lithotomy and other surgeries.
Portable and easy to operate, it can store slush automatically. It does not need the support of other devices. The stainless steel slush basin conforms to hospital standards, specifications and requirements. In operating this slush freezer, infuse heat-conducting media (freezing point=-37°C). Then, fill the slush basin with requisite saline solution and press the control switch. When slush is produced, just stir the solution. If the slush is used up and still needed, repeat the above steps with precooled solution.
Product parameters
1. The ice-making basin has a holding capacity of about 8 liters, which is easy to move and disinfect.
2. The freezing temperature is -37℃.
3. Refrigerant: R404A
4. The copper tube inside the machine is soaked with a refrigerant, which can conduct sufficient heat exchange and has good cooling efficiency;
5. The ice tray is made of medical grade stainless steel, which is corrosion-resistant and can be sterilized at high temperature;
6. Adopt the compressor with good reputation in the industry to ensure the cooling effect; 7. The machine itself is equipped with a sewage outlet, which is easy to clean after use;
8. Air-cooling method, the ventilation openings of the shell have sufficient clearance, and the ventilation effect is good;
9. Power requirements: 220V/50HZ/1 phase
10. Have product-related intellectual property rights and patent certificates
中文
