An innovative, cost-effective vacuum manifold for all filter plates in SBS standard. The individual parts of the AHN Manifolds are made of tempered transparent acrylic material. The connecting sleeve is made of PTFE and the washer is made of synthetic rubber. The Manifold can be cleaned with normal laboratory cleaners, mild detergents, without problems.
The AHN Manifold contents from following parts:
1 piece of vacuum chamber- bottom part for inserting the receiver plates (height = 50 mm)
1 piece of vacuum-connecting sleeve for screwing into the bottom part of the chamber
1 piece of vacuum chamber- upper part for inserting the filter plate (height = 20 mm)
1 piece of spacer for inserting into the bottom part of the chamber (height 22 mm)
Declaration of Conformity
As in vitro diagnostic medical device classified as follows according to the directive on in vitro diagnostic medical devices 98/79 EC and marked with the CE-IVD sign.
bio-equip.cn
中文
