LS-100+ EMBEDDING CENTER

◎     Attractive appearance; Three-body combination structure. They can be placed randomly due to user habit.

◎     Programming time system, they can separately set start-of-time, end-of-time and working cycle. User may heat(cool) in advance to ensure work on time.

◎      Big capacity paraffin tank can contain

◎      

◎     Six heated points controlled by microcomputer: 1). paraffin bath 2）.paraffin flowing tube 3) Pincer hole 4). Paraffin dropping board 5). Tools bath 6). Tissue cassettes keeping bath

◎     Light, magnifier , flowing valve and waste collecting tank are fixed outside paraffin flowing tube.

◎     LED Displays technical parameter. It shows start/end of work time, temperature for every heating place and present time.

◎     Sensor self diagnostic system.

◎     Embedding center adopts low power consumption micro single switch technique that was developed by Power Integrations company, and PTC as heating elements. It can work under wide voltage and heating elements can work well,  not limited by local voltage.

◎     PTC works as heater. It has thermostatically controlled function and reduces risk of burning. Other advantage such as  high power transfer efficiency,  energy saving, environmental protection, long usage time, safety and so on. It makes sure that paraffin melt fast, stably and does not disassemble.

◎     Peltier makes paraffin fast freeze.

◎     Adopt build-in EEROM chip microprocessor that produced by Microchip company. Save all set data into EEPROM and will not be lost.

◎     Foot switch is optional

 Specification；

◎     Paraffin keeping bath capacity: 5000mL

◎     Paraffin flowing tube temperature: 55～75℃

◎     Paraffin dropping board temperature: 55～75℃

◎     Tools bath temperature: 55～75℃

◎     Tissue keeping tank temperature: 55～75℃

◎     Tissue cassettes keeping bath temperature: 55～75℃

◎     Pincer hole numbers: 4 stations

◎     Tissue cassettes keeping bath size: 260×200×50mm

◎     Embedding dimension: 350×570×300mm

◎     Tissue keeping machine dimension: 350×570×300mm

◎     Voltage and frequency: AC220V±22V  50Hz

◎     Power: 800w

LS-101+ COLD PLATE

◎     Compressor provides fast freezing

◎     Microprocessor is in charge of temperature by controlling sensor. 

◎     LED displays current temperature , preset value, start/end of time and so on.

◎     3 minutes self-protection circuit to make sure compressor safety.

◎     Large working surface can put 100 cassettes.

◎     Attaining working temperature after switching on 10 minutes.

Specification；

◎     Cold plate temperature: -2℃~-20℃

◎     Cold plate dimension: 500×570×300mm

◎     Voltage and frequency: AC220V±22V  50Hz

◎     Power: 300w