Features
1. Eight functions in 1 tank: warm water spray cleaning, ultrasonic cleaning, water blast, ultrasonic rinse, hot water blast, hot water disinfection, rust lubricant processing, electric drying
2. Digital indication of equipment’s manufacturing date.
3. Digital indication of add-up working time.
4. Digital indication of ultrasonic cleaning time of memory and setting.
5. Digital indication of operative mode and setting.
6. Digital indication of low level, no liquid protection indication.
7. Digital indication of over-temperature, over-current protection.
8. Soft start, signal feedback function.
9. internal fault, output open Output short circuit warning.
10. Adjustable heating power
11. 2 kinds of heating, electronic & input steam heating
12. Adopting the electrical-control supplying enzyme
13. Adopting electrical-control lifting apparatus to make better lower-noise effect.
14. Adopting the stainless-steel net sieve and auto-argon arc welding.
Application
Use in hospital for cleaning , sanitizing and drying the nobleness degree medical instruments.
The necessary equipment for operating, supply room and disinfection center of hospital , R&D institution , laboratory.
|
Model
|
KMH1-1680U9968-1-8
|
KMH1-1100W0128-1-8
|
|
Tank size
|
600*400*400mm
|
600*600*400mm
|
|
Outlook size
|
800*800*1100mm
|
800*1000*1100mm
|
|
Vol
|
96L
|
144L
|
|
Water Level
|
1-300mm
|
|
Voltage
|
380VAC Three-phase five little system
|
|
Ultrasonic Frequency
|
40-80-120kHz
|
|
Ultrasonic Power
|
1500W
|
1800W
|
|
Adjustable Power
|
20-80%
|
|
Spray Power
|
1100W
|
|
Wind power
|
375W
|
550W
|
|
Water Heating Power
|
15KW
|
|
Dry Heating Power
|
5KW
|
|
Largest Power
|
16KW
|
17KW
|
|
Disinfection Temp
|
93℃
|
|
Dry Temp
|
100℃
|
|
Timer adjustable
|
1-480min
|
|
Agent dosage
|
100ml/min
|
|
Drainage
|
AUTO
|
Principle:
Ultrasonic cleanout machine is mainly made of ultrasonic signal generator, ultrasonic transducer and cleaning slot. High frequency vibratory signal produced by ultrasonic signal generator is converted into high frequency mechanical vibration of tens of thousands of times per second through transducer. It forms ultrasonic in the cleaning solution (media) which expand radiation through transducer through high-frequency changing of positive and negative pressure. That produces small bubbles in the cleaning solution and the small bubbles will rupture continuously. This is the gasification effect. When the bubbles breaks it will form more then 1000 transient high-pressure which is above atmospheric pressure, then it generates a series of mighty energy, thus exerts huge impact to the surroundings, then pushing it exerts to the surface flakes away the dirty dust form the surface of machines so as to reach the goal of purification.
ULTRASONIC CLEANER
Working theory of Ultrasonic Cleaner
Ultrasonic Cleaner sends out high frequency shaking signal, which is converted into high frequency mechanical shaking, spreads in the solvent and produces thousands of tiny bubbles. These bubbles are formed and developed in the negative pressure area in the transferring process.
Later they are immediately closed in the positive pressure area. Instantaneous high pressure of more than 1000 p is then produced and this process is called vacuum effect. It is just like a series of explosions which constantly heat the surface of the subject and reach the purpose of complete cleaning
Incredible Cleaning Effect
Because of its special design, this instrument has improved both dissolution and emulsifications in solutions. Besides the Ultrasonic Cleaner has great degassing effect without causing pollution to environment, therefore it has been widely used in machinery, electronics, medical, chemical tests and other industries. Volume Range 5 to 200 L.
Salient Features
•Ultrasonic Cleaner removes micro dust, clot, and blood stains, in instruments/scopes in 3 to 5 minutes.
•Maintains the sharp edges of the instruments and totally eliminates the breakage of fragile glassware apparatus like test tubes, pipettes, etc.
•Continuously maintains the standard of qualitative cleaning.
•Cumbersome and time consuming processes can be eliminated by using Ultrasonic Cleaner.
•Facilitates to perform more surgery in a day.
•Easy removal of hard stains.
•System is portable and provides maximum efficiency with minimal maintenance.
•Can be used in operation Theatres, Optical and Dental Clinics, Hospitals, Laboratories and diagnostic centres.
•In built water level sensor and heater with digital timer control for each function.
•Its totally made with latest international sweep and degassing technology.
GTSONIC
Add:19F,XuSheng Building,Tongcheng Road,Xixiang,Bao’an District ,Shenzhen
Factory:GT SONIC Technology Park, Meizhou,Guangdong
Tel : 86-755-23356715 Fax : 86-755-29918628
Cellphone:0086-137 9449 5645
Ultrasonic Technical Solution Provider
Guangdong GT Ultrasonic Industrial Co.,Ltd is a professional ultrasonic cleaner manufacturer established in 2003, collection of R&D, design, production. To be the ultrasonic technical solution provider, produce four series products, "Household ultrasonic cleaner", "Stainless steel ultrasonic cleaner", "Medical ultrasonic cleaner", "Industrial ultrasonic cleaner" with hundreds of specifications.
GT International (Hong Kong) Group Co.,Ltd, which continue investment in China mainland, has formed an enterprise group in ultrasonic industry.
Shenzhen GT Ultrasonic Medical Equipment Co.,Ltd, established in 2003, is the pioneer of the medical ultrasonic industry.
Chengdu GT Jiuzhou Technology Co.,Ltd, is a hi-tech enterprise, within national professional research team and many patents from the country. Specialized in the R&D of large-power ultrasonic technology, which do great contribution to the environmental protection of the country.
GT Ultrasonic Group, with development strategy planning, has clear division with location advantages of each other, brand planning and scale advantage.We provide varies ways of business cooperation for customer in mutual benefit. Sincerely welcome all customers visit and discuss more details with us.
bio-equip.cn
中文
