APPS automatic industrial preparative chromatography system Process, the use of liquid chromatography separation (pilot) technique is used to research and development and application of the mass production, is widely used in pharmaceutical, and biological macromolecular separation and purification of natural products and. Based on Dr. FLASH system with large Numbers of users, has carried on the improvement and optimization, the latest APPS Pilot system, and listed by DR FLASH and Ez Purifier system, components from r&d to Pilot plant to produce all series of products, and can customize according to customer's technology system
1.Modular design, applicability of configuration, to satisfy different customer's technology needs
2.Industrial PLC and workstation based on PC control software, interface simple, conform to the requirements of the cGMP software environmen
3.One-stop service, configuration can upgrade after installation, increase the applicability and service life
4.Complete in compliance with regulatory requirements document and service for DQ, IQ, OQ and PQ validation file
5.The detector can be connected by optical fiber, stable and reliable
Technical indicators
The pump head |
Hydraulic diaphragm pump head, high measurement accuracy of 1% or less, zero leakage, overload protection, high life. |
Pump head |
316 l stainless steel/PTFE |
line |
To 1/4 "OD (4 mmID) 3/8" OD (7.7 mmID) 1/2 "OD (9.4 mm ID) 1" OD (20.4 mm ID) |
Flow range |
1-80 l/H 4-180 l/H 15-900 l/H 45-1800 l/H |
Piping material |
316 l stainless steel/PP |
Accuracy of traffic |
Plus or minus 1% or less |
Pressure range |
Health level line (PP pipe 6 or less bar, stainless steel tube 10 or less bar), other types of pipeline can be custom-made acuities were 10 mpa |
Temperature range |
2 ℃ and 40 ℃ |
The injection method |
Injection pump |
Testing way |
On-line detection of 200-800 - nm wavelength accuracy + / - 1 nm, absorption value of 4 or higher au (software adjustment deuterium tungsten lamp energy, can prolong the service life to 2 years) |
Collect mode |
Window can be manually, the entire collection, collection, collection. |
Conductivity detector |
0-500 ms/cm (optional) |
PH detector |
0 to 14 < > is optional |
The power supply |
Input voltage AC110 50/60 hz ~ 380 v |
The control mode |
The graphical interface, the PC software based on Windows XP workstation, industrial PLC + HMI |
Seal protection level |
NEMA 4 x/IP 65 |
size |
750 mm * 1320 mm * 1250 mm (length/width/height) |
bio-equip.cn