Specification parameters

Stirring method : Strong magnetic stirring + mechanical stirring

Reaction workstation: 1workstation/2workstations/3 workstations/4 workstations/5 workstations (4 workstations in stock).

Synthesis volume per workstation: 5 ~1000ml Volume less than 1000ml need to use the supporting metal module, the maximum 1000ml volume

Features 5, reactor: equipped with 1000mL split reactor (kettle body and kettle lid separate design), can be equipped with metal module, 500ml, 300ml, 250ml, 200ml, 100mL, 50mL, 25mL, 10mL high borosilicate glass reaction tube (atmospheric pressure and pressure reaction tube can be configured).

Features 6, temperature control volatility (three types of temperature control):：

1: low-temperature circulation control (1000ml reactor measured, connected to the outside of the low-temperature circulation pump state temperature control, control of the metal sandwich temperature control state): ± 1 ℃, low-temperature module linked to the tap water to achieve rapid cooling of the material.

2: electric heating temperature control (1000ml reactor measured, no low-temperature cycle state temperature control, including material control state): ± 1℃

3:Low-temperature cycle programme temperature control (1000ml reactor measured, temperature control under the state of high and low temperature integrated machine, including jacket and internal temperature control state): ±1℃.

Temperature control display accuracy ：0.1℃ ,  Temperature control range: -40 ~250℃,Magnetic stirring speed range: 100~1500rpm

Multi-function LCD screen mechanical stirrer Speed range: 100-1500 rpm, Mechanical stirrer with LCD screen 4.5 inch colour multi-function configuration.

Mechanical stirring speed setting range: 100-1500rpm, accuracy plus or minus 0.1rpm,Mechanical stirring timing range: 1 second-9999 hours.

Mechanical stirring only with thermocouple can be arbitrary temperature measurement within 500 degrees Mechanical stirring with a key lock function, after the lock screen can not be adjusted parameters.

Mechanical stirrer design: the stirrer can be equipped with stirrer bars of less than 7mm in diameter, which can be installed through the rod, and with the PTFE stirrer plug, it can be used for stirring under vacuum and gas-filled condition.

Temperature setting and indication: LCD display , knob temperature adjustment.

Stirring setting and indication: set by knob and LCD display status, Cooling water connection O.D.: 10mm

Independent temperature control design for each reaction unit: with RS232 interface to link to computer.

Dimensions : 800 x 350 x 320mm; Weight:34kg.

Power supply: Domestic: 12A; 220V or 110V; 2760W (rated power)