Trichomonas Vaginalis Antigen Rapid Test Device,SPAN_specification/price/image

Product Detail
Company Profile

For professional in vitro diagnostic use only.

The Trichomonas Vaginalis Antigen Rapid Test is intended for the qualitative detection of Trichomonas vaginalis(

“

Trichomonas

”

) antigens from vaginal swabs or from the saline solution prepared when making wet mount from vaginal swabs.

20 Individually packed test devices	Each device contains a strip with colored conjugates and reactive reagents pre-coated at the corresponding regions.
2 Extraction Buffer vial	0.1 M Phosphate buffered saline (PBS) and 0.02% sodium azide.
1 Positive control swab (on request only)	Contain inactived trichomonas and sodium azide. For External control.
1 Negative control swab (on request only)	Not contain trichomonas. For external control.
20 Extraction tubes	For specimens preparation use.
1 Workstation	Place for holding buffer vials and tubes.
1 Package insert	For operation instruction.

For professional in vitro diagnostic use only.
Do not use after expiration date indicated on the package. Do not use the test if its foil pouch is damaged. Do not reuse tests.
This kit contains products of animal origin. Certified knowledge of the origin and/or sanitary state of the animals does not totally guarantee the absence of transmissible pathogenic agents. It is therefore, recommended that these products be treated as potentially infectious, and handled observing the usual safety precautions (do not ingest or inhale).
Avoid cross-contamination of specimens by using a new specimen collection container for each specimen obtained.
Read the entire procedure carefully prior to performing any tests.
Do not eat, drink or smoke in the area where the specimens and kits are handled. Handle all specimens as if they contain infectious agents. Observe established precautions against microbiological hazards throughout the procedure and follow the standard procedures for proper disposal of specimens. Wear protective clothing such as laboratory coats, disposable gloves and eye protection when specimens are assayed.
Do not interchange or mix reagents from different lots. Do not mix solution bottle caps.
Humidity and temperature can adversely affect results.
When the assay procedure is completed, dispose the swabs carefully after autoclaving them at 121°C for at least 20 minutes. Alternatively, they can be treated with 0.5% sodium hypochloride (or house-hold bleach) for one hour before disposal. The used testing materials should be discarded in accordance with local, state and/or federal regulations.
Do not use cytology brushes with pregnant patients.

The kit should be stored at 2-30°C until the expiry date printed on the sealed pouch.
The test must remain in the sealed pouch until use.
Do not freeze.
Cares should be taken to protect components in this kit from contamination. Do not use if there is evidence of microbial contamination or precipitation. Biological contamination of dispensing equipments, containers or reagents can lead to false results.

Insert the swab into the inside of the vagina, and rotate for 20sec. Pull the swab out carefully!
Do not place the swab in any transport device containing medium since transport medium interferes with the assay and viability of the organisms is not required for the assay. Put the swab to the extraction tube, if the test may be run immediately. If immediate testing is not possible, the patient samples should be placed in a dry transport tube for storage or transport. The swabs may be stored for 24 hours at room temperature (15-30°C) or 1 week at 4°C or no more than 6 month at -20°C. All specimens should be allowed to reach a room temperature of 15-30°C before testing.
Do not use 0.9% sodium chloride to treat swabs before collecting specimens.
The solution remaining in the test tube used for the wet mount may also be used as the sample for the trichomonas test. To use this sample type, add 3 drops of the solution to the sample well directly. These saline specimens may be held at room temperature for no longer than 24 hours. These specimens may also be stored at 4°C for up to 1 week or -20°C for 6 month.
To run a culture as well as the Test, Separate swabs must be collected because the sample buffer will kill Trichomonas organisms.

Bring tests, specimens, buffer and/or controls to room temperature (15-30°C) before use.

Place a clean Extraction tube in the designated area of the workstation. Add 20 drops of Extraction Buffer to the extraction tube.

The specimens extracted can retain at room temperature for 60 minutes without affecting the result of the test.
Remove the test from its sealed pouch, and place it on a clean, level surface. Label the device with patient or control identification. To obtain a best result, the assay should be performed within one hour.
Add 3 drops (approximately 100 µl) of extracted sample from the Extraction Tube to the sample well on the test cassette.

Avoid trapping air bubbles in the specimen well (S), and do not drop any solution in observation window.

Wait for the colored band(s) to appear. The result should be read at 15 minutes. Do not interpret the result after 20 minutes.

Rebecca Yan

Product Manager
Span Biotech Ltd.
Tel: +86(755)89589611
Cell Phone:+8618823462100(WhatsApp)
Web: