Standard Features
The common control system fitted to every autoclave in the Rodwell range. The MP25 has evolved to be one of the finest laboratory instrument control systems on the market today. What sets this system apart from any other control system is that it is totally interchangeable. The same MP25 control system can be used with any Rodwell autoclave, from a bench top to a large square chambered vacuum machine.

MP25 Options

25 programs
Can be programmed and stored by the laboratory Supervisor.

Smart card access system
•Allows programs to be stored and locked off by a supervisor
•Operator cards give access to pre-programmed cycles only
•Available with or without operator smartcard access for operator access

Load Activated Sterilise timer
(On/Off) prevents the sterilise timer from starting until the chamber and load have reached set point temperature.

Free steam timer (adjustable by time)
Holds the chamber at approximately 100°C (without pressurising) for a pre-determined time during the heating period and allow efective steam penetration into the load.

Delayed start (24 hour clock)
Timer option allows the autoclave to be pre-programmed at a pre-determined time so the autoclave completes a cycle just before the lab arrives for work the following morning for pre-prepared warm media.

Adjustable Stay Warm (on/off)
Keeps the chamber warm at the end of the cycle for pourable media. This is adjustable to allow the operator to select the optimum temperature.

Instrument Cycles (programs 21 to 24 only)
Exhausts the chamber at the end of the cycle for dryer glassware and instruments upon completion.

Rodwell autoclaves tend to cost more than most of the competition but vast savings are quickly realised due to reduced operating, service and maintenance costs. Not to mention the costs to your laboratory when an autoclave breaks down.

You get what you pay for? This is certainly the case for cheaper equipment for the reasons mentioned above, but with Rodwell Autoclaves you do not get what you pay for. You get more: The highest quality materials, High pressure pipe work and compression fittings for easy maintenance, Proven materials, systems and technology, Control system with more standard features, Solid construction which ensures many years reliable service.

Upgradeable technology, sensible and practical design as opposed to mere aesthetics, safety locks and lock detection systems, Diagnostic control system that informs the operator of the nature of any faults for quick and simple fault finding.

Rodwell Scientific Instruments is a division of the Rodwell Engineering Group, a family owned company who’s team of engineers have achieved success over the past 50 years simply by doing their best to ensure total customer satisfaction.

We have been exporting for the past 30 years and have established distributors in many nations all over the world. Our distributors share our commitment for proficient after-sales service using fully trained engineers with access to support from the manufacturers they represent.

Making full use of modern available technology, Email and the internet has allowed us to develop up-to-date software (optional) which allows the scientist to email complete cycles to our technical department for full on-screen diagnosis and set-up recommendations.

Rodwell Engineering Group is a family business founded in 1945. Over the years it has expanded to a multi-faceted engineering company though natural growth, acquisition and shrewd investment. Some of Rodwell’s acquisitions have a history spanning back nearly 100 years!

The company also has extensive property and business interests which ensure financial stability even throughout the most turbulent times.

This broad nature of Rodwell Engineering Group’s activities plus sound financial foundations ensure that your Rodwell Autoclave is manufactured to the highest engineering standards and can be supported throughout its lifetime.