Description:

The low temperature BOD incubators of the ZXSP-series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation and determination of enzymatic activities. All these applications require precise and constant temperature control. Each model has a wide temperature range from -10 °C to 65 °C and can be operated at a single user defined temperature, but can also be programmed with up to 9 different temperature segments within a time frame. (18 steps). The (cooling) compressor runs continuously and the control are done through a solenoid valve for more precise temperature control if lower than ambient temperatures are required.

Both the interior and exterior are made of robust materials for lifetime operations. The inner chamber is made of high quality #304 stainless steel sheets, with 4 round coved corners. All exposed edges are de-burred to insure no sharp edges. The exterior is cold rolled steel finished with powder coated polyurethane finish, which is resistant to most chemicals and easily cleaned with mild household detergents.

Features:  

◎P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode.

◎Three-dimensional heating system ensures fast response, and high uniformity of ±0.5°C@37°C.

◎The compressor system runs at all times-(except for higher internal temperatures). If cooling is required, a solenoid valve –also driven by the microprocessor-will be activated and cool down the incubator to the required temperature.

◎Real-time electronic timer from 0 to 999 minutes.

◎Non-volatile memory retains pre-set parameters in case of power interruption.

◎Triple safety protections for samples, incubator and environment.

◎All electrical components are fully accessible after removing the top-cover

◎Independent device for over temperature, high current flow and electric leakage.

◎Standard configurations: a fluorescent light, forced air circulation, 50mm test port and 2 grids.

◎Optional built-in printer, UV Lamp, RS-232 interface available.