Description:

The premium BOD incubators of the ZXSD-R series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation and determination of enzymatic activities. It features a 4.3'' TFT touch screen panel, which ensures clear indication as well as easy operations. Each of the four models has a wide temperature range from ambient -18 °C (minimum 4°C) to 65 °C and can be operated at a single user defined temperature, but can also be programmed with up to 9 different temperature segments within a time frame (18 steps). The (cooling) compressor runs continuously and the control is done through a solenoid valve for more precise temperature control if lower than ambient temperatures are required.

ZXSD-R series BOD incubators also feature a back-up program in case of power failures, the stored parameters remain in the memory of the microprocessor. Your experiment therefore resumes under the same conditions even when interrupted by an interruption of power.

Features:

• P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode.
• 4.3'' TFT touch screen panel displays all parameters, easy operation and readout for all control modes.
• Three-dimensional heating system ensures fast response, and high uniformity of ±1.0°C@37°C.
• Sound cooling system with CFC free refrigerant and automatic defrosting system.
• Real-time electronic timer from 0 to 999 minutes.
• Alarms for sensor failure, high and low temperature and power cut.
• Password protection of all parameters against unauthorized access.
• Non-volatile memory retains pre-set parameters in case of power interruption.
• Triple safety protections for samples, incubator and environment.
• Independent device for over temperature, high current flow and electric leakage.
• Standard configurations; a double layer tempered glass observe window in outer door, an inner glass door, forced air circulation, a fluorescent lamp, 50 mm test port and 2 grids, built-in printer.
• Optional UV Lamp, RS-232 interface available.

Specifications:

Order Information: