Dynamic Torque Sensor

Model: CJNJ-02

Introduction

CJ-NJ02 dynamic torque sensor is based on proprietary technology developed on the strain bridge, special sensors for measuring torque, speed parameters. This series torque sensor uses strain bridge measuring technology, using a set of toroidal transformer provides a non-contact power supply, micropower signal coupler instead of toroidal transformer for non-contact signal transmission, effectively overcome the inductive interference and harmonic energy toroidal transformer toroidal transformersignal mutual interference, while the output spikes into a square wave signal, etc. Therefore, this series torque sensor can be a long, high-speed operation. These series can be used for dynamic measurements, variety of installation design, takes users great convenience.

 

Technical Parameter

Rotating Speed Range	5Nm,20Nm, 50Nm, 100Nm, 500Nm, 1000Nm, 2000Nm
Power supply	±15VDC/ 24VDC(optional)
Torque signal	5 ~ 15Khz (amplitude 12V, zero 10kHz); 4 ~ 20mA; 1 ~ 5V, 0-10VDC (optional)
Rotating Speed Range	0 ~ 1000,3000 rev / min
Rotating Speed Signal	60 pulses/revolution (no accumulation of errors, the amplitude of 12VDC), 4-20mA, 1 ~ 5V
Accuracy	±0.5%
Stability	0.3% / year
Insulation resistance	≥200MΩ(100VDC)
Ambient temperature	-20 ~ 60 ℃ (can be customized high temperature -20 ~ 120 ℃)
Relative humidity	0~90%RH
Overload	150%
Frequency response	1ms

Xian Chuangjin Electronic technology Co., LTD founded in year of 2013 is professional in researching and providing a series of Pressure/Level/Temperature Transmitter,Sensor,Switch Controller,Flow Meter, Density Meter,Vibration Wire Piesometer,MINI Osmometer,Earth Pressure Cell,Dynamic Strain Amplifier.We offer ODM and OEM service and own ISO9001:2000 Certificate.Pressure Transmitters and Temperature Transmitters are granted CE certificate.

These products are also widely used in aeronautical and space,waterway,navigation,petrochemical industry,irrigation works,electric power,coal metallurgy,water supply,natural gas supply,steam and warm supply,medicine and bioengineering etc and scientific research institutions.
When there's no standard product to fit your application or cost requirements, simply talk to us about your requirements,both technical and budgetary,and we’ll develop your customer solution, including power supplies, measurement range,output,port type etc,then fully test the system prior to supplying it to you on time,complete and ready to install.Welcome customer from domestic and abroad to inquiry.