The FID STATION PLUS hydrogen and air generator uses the latest proton exchange membrane (PEM) technology to produce pure hydrogen. The hydrogen is ideal for use in gas chromatographic detectors such as FID, NPD, and TCD, and as a reagent gas for ELCD and HALL.
The horizontal format is designed to sit under and support the weight of your GC, optimizing bench space.  At only 17 cm high, the generator will still allow easy access to the injectors of any GC on the market. De-ionized water is automatically loaded from smart internal system tanks with a 3 litre capacity, providing up to 3000 litres of H2 before a refill is required.  The only recommended maintenance is replacement of the internal deionizing cartridge, which has been greatly simplified.

FID Station PLUS models produce an H2 flow of up to  600cc/min with a purity of 6.0, or up to 1000cc/min with a purity of 7.0. The optional zero air generator provides 1.8 l/min or 5 l/min of zero air with HC content around 0.5ppm.

FID Station Plus FEATURES
USER-FRIENDLY CONTROLS
Full microprocessor control
LCD touch screen interface or push buttons: real time outlet pressure, water quality, auto diagnostics, leak detectors, water level, and quality sensors

POWERFUL WATER PUMP
Optimized powerful water pump for PEM cell

CASCADING
The ability to "cascade", or install several hydrogen generators in parallel, provides:
• Higher flow rates - up to 10 lpm
• Automatic flow compensation in the event of unplanned downtime
• Continuous operation for critical applications

FID Station Plus BENEFITS
SAVINGS
Hydrogen gas generators eliminate the need for expensive installation of gas pipelines from the cylinder storerooms to the labs, as well as the need to repeatedly change the bottles. The dual configuration H2 or H2 + Air, available in a single instrument, saves space and money.

IMPROVED CHROMATOGRAPHIC RESULTS
Hydrogen as a carrier gas is faster and more sensitive than the more expensive helium, providing run time savings of 25% to 35% without a decline in resolution.

EASY USE AND MAINTAINENCE
The unit features remote software control via RS232, USB, or intranet. With automatic cold dryer regeneration, there are no caustic solutions used. Maintenance is simplified by our deionizer bag access system, which allows changing out the deionizer bag without tools, without even turning off the instrument.

IMPROVED SAFETY
The very small internal volume (less than 50 ml) allows safe use of gas generators where the use of cylinders is risky or prohibited. The application of tested safety technologies stops the unit in the event of leaks or malfunction. An optional hydrogen sensor is available for monitoring the oven-LEL of the GC. The VICI DBS Plus series also includes additional security features like a shock sensor to prompt shutdown in the event of an earthquake.

INCREASED PRODUCTIVITY
Round the clock continuous operation maximizes lab productivity, eliminating dead time for gas bottle changeover and maintenance of the drying system.

OPERATING PRINCIPLE
Hydrogen is produced by forcing distilled or deionized water through a sophisticated Swiss-made fuel cell. Electrolytic dissociation separates the water into its two main components: hydrogen ready for analytical use, and oxygen that is released into the air. No acid no alkaline solutions are used in the hydrogen generation cycle. The patented automatic drying system ensures the maximum grade of hydrogen purity.  

Specifications
FID FLAT-NM Plus series for all GC Detectors and Carrier Gas Applications

Models(H2)	FID FLAT-NM 100 Plus	FID FLAT-NM 100 Plus	FID FLAT-NM 600 Plus	FID FLAT-NM 1000 Plus
Flow rate (ml/min)	100	300	600	1000
Weight (kg)	approximated 35
Purity	100.00%
Display	Operating parameters, system status, alarms and touch screen
LED Indicators	Power on/off, system ready, errors
Membrane	Polymer Electrolyte Membrane(PEM)
Dryer	Exclusive cold dual dynamic regeneration system
Max Outlet Pressure	11 bar (160 psig)
Internal Volume	<50 ml at max pressure
Water quality	Deionized or demineralized (<2μs)
Internal water tank system	7L autore_ll included
Cascading	The exclusive cascading option allows up to 32 units to be connected in series
Connections	1/8 swagelock
Power	110-120 60 Hz / 220-240 50 Hz
Dimensions(mm)	690W x 150H x 680D
Tested weight support (kg)	80
Connection	USB mod A
Certi_cations	CE, CSA, FCC
Options	RS232/RS485 and USB, external contacts, PC software,Manage & Control, Intranet

 

Models (H2)	FID FLAT-PG 100 Plus	FID FLAT-PG 250 Plus
Flow rate (ml/min)	100	250
Weight (kg)	approximated 40
Purity	100.00%
Display	Operating parameters, system status, alarms and touch screen
LED Indicators	Power on/off, system ready, errors
Membrane	Polymer Electrolyte Membrane(PEM)
Max Outlet Pressure	11 bar (160 psig)
Internal Volume	<50 ml at max pressure
Water quality	Deionized or demineralized (<2μs)
Internal water tank system	7L autore_ll included
Cascading	The exclusive cascading option allows up to 32 units to be connected in series
Connections	1/8 swagelock
Power	110-120 60 Hz / 220-240 50 Hz
Dimensions(mm)	690W x 150H x 680D
Tested weight support (kg)	80
Connection	USB mod A
Certi_cations	CE, CSA, FCC
Options	RS232/RS485 and USB, autore_ll, external contacts, PC control, Intranet

Wiggens is a manufacturer of high quality laboratory equipment based in Beijing, China. We started out as distributor for laboratory equipment and soon became an exclusive distributor for most reputable lab equipment manufacturers. After being established as a well-respected and highly successful distributor all around China, we made the successful transition from a mere distributor to producing high level laboratory equipment itself.

Since 2006 we produce top-quality laboratory equipment and, by making use of our well- established distribution network, we were able to quickly establish our products in the domestic market.

Our two brands Wiggens and ChemVak stand for high quality, long durability, and remarkable performance.

Wiggens is your general laboratory companion and provides products that can be used in all kinds of laboratory environments. The Wiggens product range entails different kinds of magnetic stirrers and hot plates. It even provides hot plates with integrated stirring functions for an even heat distribution among your solvents. In addition to the magnetic stirrers Wiggens also provides overhead stirrers with diverse characteristics to perfectly match the solvent used. In addition, Wiggens offers homogenizers of different magnitudes as well as a broad range of shakers, multi- purpose heaters and colony counters. As a new feature in the 2014 range Wiggens now also provides incubators and water baths for full temperature control.

ChemVak on the other hand has been created as a brand specialized in vacuum equipment. Different kinds of vacuum pumps, including chemical-resistant diaphragm pumps and oil-free piston pumps, are complemented by vacuum filtration equipment to form whole filtration systems for a wide range of different applications. In addition, Water-jet aspirator pumps and bio-suction systems are part of the product range. In 2014, a new line of gas generators became part of the ChemVak product line and round out the picture of ChemVak as a specialist for vacuum and gas related operations.