|
Weight:
|
8.1kg
|
|
Overall dimensions:
|
430mm（L）×335mm（W）×175mm（H）
|
|
Power:
|
a.c.110V~220V，50-60Hz
|
|
Fuses:
|
T2AL250V
|
|
Work Environment:
|
temperature 10℃-30℃；Humidity ≤70%
|
|
Store Environment:
|
-20℃-55℃；Humidity ≤93%
|
|
Standard Wavelength:
|
405，450，492，630nm，Ten optical fibers can be configured within 400 to 800 at a time;
|
|
Instrument sensitivity:
|
no less than 0.01L/mg.
|
|
Instrument channel difference:
|
less than 0.01A.
|
|
Range of operating wavelength:
|
400-800nm;
|
|
Detection range:
|
0.000-4.000A;
|
|
Resolution ratio:
|
0.001A;
|
|
Plate reading velocity:
|
5s of single waveform, 10s of dual wavelength;
|
|
Warm up time:
|
10 minute
|
|
Interface:
|
RS-232C serial interface, USB interface
|
|
Display:
|
5.7″LCD display（320×240 discernibility,256 gray scale）
|
|
Input:
|
Touch panel and pen,
|
Technical Specifications
1) Wavelength characteristics: requirements on accurate wavelength and half wave width of optical fibers for instrument see the table below.
Unit: nm
|
Accurate wavelength
|
Half wave width
|
|
±3.0
|
≤12
|
2) Accurate absorbance and linear error: measurement accuracy and linear error of instrument shall comply with the provisions as described in the table below:
|
Absorbance range
|
Accuracy
|
Linear error
|
|
0.000-2.000
|
±0.01
|
±1.0%
|
|
>2.000-3.000
|
±0.05
|
±2.0%
|
|
>3.000-4.000
|
±0.15
|
±5.0%
|
3) Repeatability of measurement of instrument: no greater than 0.5%.
4) Instrument stability:
a) Absorbance varies shall be no greater than ±0.005A within 10min due to drifting.
b) If the power supply voltage of 220V varies by ±10%, the resulting variation of absorbance is no greater than ±0.005A.
bio-equip.cn
REAGEN LLC is an indrustry-leading biomedical enterprise focused on designing and producing a broad range of ELISA kits, including clinical diagnostic kits, food and feed safety kits, and veterinary disease kits. we also manufacture microplate readers, plate washers, and related instruments and equipment.
中文
