Multi Channel Valves,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

Multi Channel Valves

Multi channel valve refers to an industrialvalve that connects and controls multiple pipelines through a rotating valvecore, with two or more channels. It enables the connection and closure ofdifferent pipeline flow paths. Its core structure includes a valve body, arotating component, and a fluid channel system. In fluid transportation, itsaves space and significantly reduces residual media in the fluid system.

Product advantages

Customized design based on user needs

A very compact valve solution

• Can integrate other components, such as sensor systems

Due to fewer connection points, the safetyof the process has been improved

Pharmaceutical&Personal Care

Application Area

Pharmaceutical&Personal Care/Bio-Fermentation/Pharmaceutical /Chemical/Personal care/Life Science

Food&Beverage/Fluid Food/Food Additives/Drinks/Dairy/Winesxk /Water

Advanced electronic equipment&vacuum applications

Semiconductor and Flat Panel Display Devices(SEMI&FPD)

Solar cells

Industrial Coating

Ultra High Vacuum Scientific Instruments (UHV R&DEquipment)

SemiconductorIndustry&Electronic Engineering

Ultra PureGas Pipeline System UHP Piping System

FactoryEngineering SP1/SP2 (Hook Up)

1. Plastichandwheel manual actuator

2.Stainless steel pneumatic actuator

Manual and Pneumatic actuators size（mm）

Type（DN）	φE	H	φE1	H1
DN6-15	φ35	62	φ50	96
DN15-20	φ65	83	φ75	136
DN20-25	φ90	106	φ88	150
DN32-45	φ110	125	φ100	178
DN50-57	φ125	148	φ112	225
DN65-80	φ145	186	φ138	306
DN89	φ180	205	φ200	354
DN100	φ180	256	φ250	395

Diaphragm Plates Introduction

Thenew type of diaphragm has added a sealing step compared to the traditionaldiaphragm,

and at the same time, it cooperates with the protrusion on the valvebody to form a closed

annular structure, which not only ensures the reliabilityof the seal, but also reduces the

retention of the medium, thus achieving thesterile requirements of the diaphragm valve.

Thediaphragm has single-layer and double-layer dense structure. The single-layerdiaphragm is composed of artificially synthesized soft rubber EPDM material,with a

reinforced mesh in the middle. The medium contact layer of thedouble-layer diaphragm is made of synthetic plastic PTFE hardcorrosion-resistant material, which is used in conjunction with the soft rubberEPDM layer with

reinforced mesh. Depending on the properties of the medium andthe requirements

of the operating conditions, single-layer or double-layerdiaphragm sheets can be

selected for use.

Diaphragmparameters

Diaphragmselection specification parameters

TYPE（DN）	F×T	n-Ød	Material	Max.working pressure	Steam
DN6-15	22×22	4-Ø4	EPDM	Max.6bar	Max.130℃
DN15-20	35×37	4-Ø7
DN20-25	48×56	4-Ø9
DN32-45	65×70	4-Ø11
DN50-57	75×84	4-Ø13	PTFE/EPDM	Max.6bar	Max.150℃
DN65-80	95×106	4-Ø18
DN89	97×126	4-Ø18
DN100	φ194	8-Ø14

Multi Channel Valves model description

Remark

2 Structural forms: (1) One bit2-way one (2), one bit 3-way one (3), two bit 3-way two (3),

two bit 4-way two(4),

Two digit 5-way two (5), threedigit 3-way three (3), three digit 4-way three (4),

three digit 5-way three(5)... n digit n-way m (n)

4 driving modes: manual (none),pneumatic (6), electric (9)

5 modes of action: double acting(none), normally closed (B), normally open (K)

6 Connection methods: flange (4),welding type (6), card type (8)

Valve body material 316L (RL),titanium alloy (Ti), Hastelloy (Hs)

11 φ12.7(0.5") ,φ19.05(0.75") ,φ25.4 (1") ,φ31.8（1.25"），φ38.1（1.5"），

φ50.8（2"），φ63.5（2.5"），φ76.2（3"），φ101.6（4"）

Descriptionof roughness

Surfacetreatment technology

Accordingto the polishing grade requirements of MP or EP surface treatment technology,the

internal and external polishing roughness of Jizhou Company's seriesproducts can meet the

requirements of ASME BPE standard

Theinner surface polishing roughness is divided into MP grade (mechanicalpolishing)

Ra ≤ 0.51 µ m; EP grade (mechanical polishing&electrolyticpolishing) Ra ≤ 0.38 µ m;

and the outer surface polishingroughness is MP grade (mechanical polishing)

Ra ≤ 0.76µ m or Ra ≤ 0.64 µ m.

	Inner surface			Outer surface
ASME BPE Surface grade treatment	polish process	Ra.Max		polish process	Ra.Max
		uim	um		uim	um
SF1	Mechanical polishing (MP)	20	0.51	Mechanical polishing (MP)	30	0.76

Valveparameter table

（1）Directvalve parameters

（1）Manual and Pneumatic Straight Through Valves Size Table

Type（DN）	L	φD*t（3A）	φD*t（GB）	F
DN15	89	φ12.7*1.65	φ12.7*1.5	27
DN20	117	φ19.05*1.65	φ19.05*1.5	28
DN25	127	φ25.4*1.65	φ25.4*1.5	28
DN32	159	φ31.8*1.65	φ31.8*1.5	31
DN40	159	φ38.1*1.65	φ38.1*1.5	31
DN45	159	φ45.0*1.65	φ45.0*1.5	31
DN50	190	φ50.8*1.65	φ50.8*1.5	37
DN57	190	φ57.0*1.65	φ57.0*2.0	37
DN65	216	φ63.5*1.65	φ63.5*2.0	38
DN80	254	φ76.2*1.65	φ76.2*2.0	40
DN89	254	φ88.9*2.11	φ88.9*2.0	40
DN100	305	φ101.6*2.11	φ101.6*2.0	45

（2）Tankbottom valve parameters table

（2）Tank bottom valve parameters table

Type（DN）	φ	B	φC*t（3A）	F
DN20	φ85	6	φ19.05*1.65	28
DN25	φ120	6	φ25.4*1.65	28
DN32	φ160	6	φ31.8*1.65	28
DN40	φ160	6	φ38.1*1.65	28
DN45	φ160	6	φ45.0*1.65	28
DN50	φ180	6	φ50.8*1.65	28
DN57	φ180	6	φ57.0*1.65	28
DN65	φ200	6	φ63.5*1.65	28
DN80	φ250	8	φ76.2*1.65	28
DN89	φ250	8	φ88.9*2.11	28
DN100	φ320	10	φ101.6*2.11	28

（3）MultipleChannel Valves

Multichannel valve product pictures and schematic diagrams

Engineering case

If you are interested, please feel free to call us for consultation.
Email: pangjun@costones.com