Flow rate range: 20 to 5800 mL/min; flow rate depends on tubing size, refer to flow chart link below.
Controller simultaneously controls up to four Digi-Staltic pump drives. Transfer four fluids at the same flow rate, or vary each independently.

System includes controller and one drive with two Easy-Load II pump heads; order additional drive(s) 77310-50 separately at right.
Save up to 30 programs into memory. No need to reprogram the controller once you have your application set up.

Control all functions of the Digi-Staltic pump through your PC. Software is included that is compatible with Windows ® 95 and Windows NT ®.
Directly input volumes, flow rates, and speed range using the 20-key, tactile-feedback keypad. Flow range is determined by tubing selection.

Menu-driven keypad facilitates direct data entry. Eighty character (2 x 40), backlit liquid-crystal display is easy to read.
Program dispensing parameters via controller: Dispense volume: 0.5 mL to 9999.9 L (based on tubing size). Cycles: 1 to 999 Interval delay time: 0.1 seconds to 167 minutes in 0.1 second increments
Completed dispense cycles are confirmed with an audible prompt; programmable from 0.0 to 60 seconds