Coconut Oil Separator Waste Engine Oil Separation Tubular Centrifuge Machine,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

Tubular Centrifuge for Coconut Oil Separation

Virgin Coconut oil otherwise called as "mother of all oils" are extracted with the help of a centrifuge. This process is also called as cold processing method as there is not heat supplied for extracting oil.Oil extracted at temperatures below 80F is of the best quality and aroma. We offer you the tubular centrifuge machine that efficiently extract oil from coconut milk.

Process:

Coconut milk if fed at the inlet located at the bottom of the bowl. The bowl is connected to a motor and separation takes place inside the rotating bowl at a speed of 15,000 rpm.The basic principle is that the difference in densities of two immiscible liquids forces the liquid with higher density outside the rotation axis. The heavier liquid phase is forced towards the bowl while the light phase is force inside. Special openings at the top of the bowl separate Virgin Coconut Oil and water at two outlets at the top corresponding to the light phase which is water and the heavy phase which Virgin coconut oil. The Virgin coconut oil separated is further fed again into the centrifuge and repeated three times to get pure oil.

GQ-for clarification: Heavy solid is deposited on the inner wall of the bowl,and forms the sludge. And it will be discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl. The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise.

GF model is a separating equipment where there the liquid phase of large density is formed into outer ring and
the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually dumped after the machine is shut down.

It is suitable for the separation of various difficult-to-separate emulsions, especially for liquid-liquid separation where the density difference between the two phases is very small (the specific gravity difference is greater than 0.1), and the liquid-liquid-solid three-phase separation with a small amount of solid phase impurities
Liquid-Liquid-Solid Centrifugal Filters Oil Water Separation Tubular Centrifuge

The centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has t types, one is GQ two phase that can separate solid from the liquid, another is GF series, which can separate the water, solid from the oil.

GF model: Liquid with big density forms the outer liquid circle, while liquid with small density forms the inner circle. Then liquid will flow out of the upper outlet accordingly, and those little solid will be deposited on the drum wall, and be removed by manual after machine stops.

GQ model: Solid particles with big density are gradually deposited on the drum's inner wall, and forms sediment layer, after machine is stopped, is removed by manual. While the clarified liquid flows out through the outlet on the upper of the drum.

Coconut Oil Separator Waste Engine Oil Separation Tubular Centrifuge Machine

Working principle of Tubular Separator
Consist of the machine cover, driving device, drum, liquid catch tray, the liquid inlet and bearing seat, this separator with high running speed, belongs to sedimentation separator. The upper drum is a flexible shaft, while the lower is damping floating bearing. The main shaft is connected by a coupling buffer and a passive wheel. Motor transmit power from the transmission belt and tension wheel to passive wheel, to drive the drum rotate around its own axis with high-speed, and thus form a strong centrifugal force field. All the materials are fed from liquid inlet under the bottom, and flow upward along the drum wall by centrifugal force fluid. During this process, the dense liquid phase forms the outer ring, and the small liquid phase forms the inner ring, which separately flow to respective liquid outlet mounted on the upper drum.
When the thickness of the sediment affect the liquid phase clarification or the capacity of the rated slag weight in the drum, the dregs of the drum wall should be removed manually after the shutdown.

Application:

Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc. Coconut Oil Separator Waste Engine Oil Separation Tubular Centrifuge Machine

Product Paramenters

Model	GF/GQ75	GF/GQ105	GQ/GF125	GQ/GQ150
Diameter(mm)	75	105	125	147
Height (mm)	450	730	730	730
Sedimentation volume(L)	2.67	6	8	10
Max speed(r/min)	20000	16800	15800	14500
Max separation factor	21000	15300	16300	15600
Inlet nozzle diameter (mm)	3/4	4/6/8	4/6/8	4/6/8/10
Material inlet pressure (Mpa)	≥0.05
Capacity (Water capacity)L	670	1600	2200	3200
Motor model	3 phase two pole motor	3 phase two pole motor		3 phase two pole motor
Motor power (kw)	1.5	2.2	3	3
Machine dimension (mm)	5007001300	60010001600	60010001600	60010001600
Machine weight (kg)	260	490	510	550