1L 2L 3L Glass Reactor,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

1L 2L 3L Glass Reactor

Introduction:

Reagents are set in the inner layer of double-layer glass reaction kettle, at the same time, vacuum can be taken out and mixing speed be adjusted. Interlayer can lead in refrigerating fluid, water and high temperature liquid to heat and cool the materials.

Application Fields:

1. It is especially designed for the small experiment in laboratory or university. Also, can be used for small-scale test in the fields of chemistry, fine chemical engineering, biological pharmacy and synthesis of new materials.

2. The products can be made into system devices with multi-purpose circulating water vacuum pump, diaphragm vacuum pump, low temperature circulating pump(vacuum), circulating cooler, constant temperature circulator, low temperature cooling liquid circulating pump and closed cooling and heating circulating equipment.

Characteristics:

1.High borosilicate glass 3.3 has good physical and chemical properties.

2.Can be used in wide temperature range from high temperature (200℃)to low temperature(-80℃). Can work in constant pressure and vacuum, vacuum degree is below 0.095MPa in stationary.

3.Digital display of mixing speed, temperature, vacuum and pressure in the reactor.

4.The sealing method and materials between mixer shaft ,PTFE mixing propeller(paddle).

6.Corrosion resistant discharge valve is without dead space design.

7.The cooling or heating solution in the interlayer can be completely removed after reaction.

Technical Data:

Model		GR-1	GR-2	GR-3
Material capacity (L)		1	2	3
Jacket volume (L)		0.3	0.6	0.9
Material		High borosilicate glass 3.3	High borosilicate glass 3.3	High borosilicate glass 3.3
Material of supporting structure and adapting piece		Stainless steel claded 304	Stainless steel claded 304	Stainless steel claded 304
Tolerable temperature of Reaction Kettle (℃)		-80~200	-80~200	-80~200
pressure (Mpa)		-0.1~ordinary pressure	-0.1~ordinary pressure	-0.1~ ordinary pressure
stirrer	power(W)	85	85	85
	Adjusting method	stepless speed	stepless speed	stepless speed
	speed(rpm)	50~1000	50~1000	50~1000
	Max viscosity (mpas)	100000	100000	100000
	max torque (Ncm)	300	300	300
	Alarm h	100	100	100
	Safety	Overheating,overload protection	Overheating, overload protection	Overheating, overload protection
Opening size of Reaction Kettle (5)	Stirring	24# standard	24# standard	24# standard
	Temperature sensor	24#standard	24#standard	24# standard
	Connector of condenser	24#standard	24#standard	24# standard
	Liquid	19#standard	19#standard	19# standard
	Connector of constant voltage funnel	24#standard	24#standard	24# standard
Inlet/outlet liquid circulation nozzie		DN10	DN10	DN10
material of sealing		PTFE	PTFE	PTFE
Power supply		1~,220V 50,60Hz	1~,220V 50,60Hz	1~,220V 50,60Hz
Discharge valve		Discharge valve without effusion, the height of the discharge valve from the ground: 100~260mm(adjustable)	Discharge valve without effusion,the height of the discharge valve from the ground:100~210mm	Discharge valve without effusion,the height of the discharge valve from the ground:100~210mm
Material of temperature transducer		Stainless steel claded by fluorine, double anti-corrosion	Stainless steel claded by fluorine, double anti-corrosion	Stainless steel claded by fluorine, double anti-corrosion
Stirring		Two-blade stirring paddle,Stainless steel claded by fluorine	Two-blade stirring paddle,Stainless steel claded by fluorine	Two-blade stirring paddle,Stainless steel claded by fluorine
Dimensions (mm)		405L420W1020H	405L420W1020H	405L420W1020H