Product Description:
This thin porous Nickel/ceramic coated Nickel membrane is designed for micro- or ultra-filtraion of particulates > 20 nm over a broad range of concentrations, particluate matters (inorganic, organic, micro-organism, virus), and temperatures (cold, hot) from gas or liquids. The membrane is made in the US.
Performance Attributes :
- Stable in various organic solvents or oils in liquid filtration
- Applicable to various gases in gas filtration, such as air, oxygen, nitrogen, hydrogen, steam, oil vapor, or hydrocarbons
- Stable at elevated temperatures
- Can remove all bacteria and virus
- Biofouling resistance
- High permeance or flux
- Cleanable for re-usage
Applications
- Water filtration: Remove micro-organisms, bacteria, viruses and particulates from process water, tapwater and seawater in one pass.
- Solvent filtration: Provide particulate-free solvent to equipment or process usage, such as, HPLC solvent elution, solvent cleaning system, etc.
- Solvent filtration: Recovery of nano- and micro-sized catalysts, adsorbents, or products from reacted solvents.
Specification :
|
Membrane:
|
Nickel alloy
|
|
Nominal Dimensions:
|
Thickness: ~ 50 µm
|
|
|
Maxmium size: up to 20 cm x 20 cm
|
|
Effective Filtration Area:
|
Adjustable between 3 cm2 to 4 m2 (with stacked membrane sheets in our filtration device)
|
|
Pore Size:
|
Adjustable between 0.02 µm to 1 µm
|
|
Operating Conditions:
|
|
|
PH requirement of liquid fluid
|
> 4
|
|
Maximum Operating Temperature:
|
< 600° C in reducing environment
< 350° C in oxidizing gas environment
|
For more information
Please visit our website: www.moleculeworks.com
Please email sales@moleculeworks.com for additional information
bio-equip.cn Molecule Works Inc. (MWI) is a US-based technology company, registered in the State of Washington, and established in 2015 to pursue commercialization of three fundamental inventions licensed from Pacific Northwest National Laboratory (PNNL): thin porous metal sheet, thin-sheet zeolite membrane, and cassette-type membrane module. Since then, MWI has successfully demonstrated scale-up of all the critical membrane preparation steps and established its proprietary pilot manufacturing capabilities for production of thin porous metal and zeolite membrane sheets. The pilot-scale manufacturing capabilities enable production of a large number of 20cm x 20cm membrane sheets for application prototype development and customer sampling.
MWI has developed several innovative manufacturing methods and processes for production of the porous metal sheet-based membrane products at low cost. MWI has also made a series of new inventions for applications of its membrane products.
|
中文
