Description
High Flow Pleated Cartridges have high particle removal efficiency and strong contaminant holding capability. PP pleated high flow cartridges utilize polypropylene end caps, outer netting and inner hard core help to protect the radial pleated structure integrity and provide consistent performance and good quality for effective particle retention. Pleated high flow cartridges can directly 100% replace to 3M Cuno 7000 and 740B high flow series filter element.
Feature
1. All polypropylene filter media construction and have wide chemical compatibility
2. Using the high flow pleated cartridges can save the replacement cost, manpower and space
3. High flow cartridge filters have high contaminant holding capacity due to the large filtration area
4. Pleated high flow cartridges are consistent high particle removal efficiencies throughout filter long life
5. The unique radial pleat design of high flow cartridges lead to high flow rate and good filtration efficiency
6. Pleated high flow cartridge filters system requires 90% fewer filters as competitive 2.5" water filter systems for a given flow rate
7. All raw materials are FDA compliant and 100% integrity testing for high flow cartridge filters, directly replace to 3M Cuno high flow series filter element
Application
1. Refining
2. Process Waters
3. Machine Coolants
4. Boiler Condensate
5. Pre-RO Filtration
6. Petroleum Chemical Industry
7. Injection & Produced Waters
8. Ground/Reclaimed/Waste Waters
Specification
Filter Media：Polypropylene
Length：20"(508mm), 40"(1016mm), 60"(1524mm)
Outside Diameter：6.5inch (165mm)
Inside Diameter：3 inch (76.2mm)
Filtration Rating：1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 70μm
Support/Drainage：Polypropylene(PP)
End Cap Material：Glass fiber reinforced Polypropylene(PP)
Seal Material：EPDM, Buna-N, Silicone
bio-equip.cn
中文
