DP-30 Aerosol Photometer 

filter integrality detection     Test method of filter integrality detection   dop HEPA test  filter integrality detection/PAO oil
integrality    filter   HEPA Leak Detection HEPA Filters/PAO,DOP,HEPA Leak Detection

Introduction

DP-30 Aerosol Photometer is a kind of special test instrument to test the leakage of HEPA, designed on the base of light scattering principle, displays real-time leakage rate by detecting aerosol concentrations of upstream and downstream.

Applicable for testing clean rooms, laminar flow benches, biosafety cabinets, glove boxes, HEPA vacuum cleaners, HVAC systems, HEPA filters, ULPA filters, negative pressure filtration units, surgical suites, nuclear filter banks, collective protection filters, etc.

Features:
User friendly interface 
3.5” LCD display, menu driven interface. Aerosol measurements, real time concentration and pump sampling rates are prominently displayed for easy viewing. System parameters and selections such as alarm types, alarm set points and aerosol reagent are shown on the lower menu bar, while icons at the top of the screen give the status of connection, alarm type, reporting mode.

Portable scan probe
The Probe acts as an extension of the base instrument through a nearly identical user interface. All status and selection icons from the base unit are represented on 2.8” LCD, which can improve work efficiency and give immediate presentation when find leakage.

Easy to trace measurement result
DP-30 has three independent reporting functions storage/continuous/print modes, the result can be printed out by a thermal printer.

Performance guaranteed
DP-30 adopts import pump (Britain), import light source (Japan) and the sensor produced with top domestic precision process technology (same as the domestic aerospace technical standard), and has been independently tested and qualified to ensure compliance with all applicable electrical and safety requirements.

Complete and quick after-sales service
As an independent domestic developed photometer, DP-30 has low cost and quick response (within 2 hours by telephone) after-sales service; free charge for software updating; prototype instrument is available.
Specification

Dim.(mm)	260×370×160
Weight	10.66kg(main body)+0.62kg(probe)=11.28kg
Housing	solid die-cast aluminum housing, easy for maintenance and calibration
Power supply	220V AC, 50/60HZ
Measuring scope	0.0001% to 100.0%
Alarm	User selectable audible, visual, and vibratory alarms notify the user when the user defined set point is exceeded.
Reagent setting	PAO
Dynamic range	Up to 600ug/L
Sensitivity	1% of readings for readings between 0.01% to 100%
Reproducibility	0.5% of readings for readings between 0.01% to 100%
Light source	Long time, steady, solid scattering chamber light source; work under low power and generate low heat and deviation value; service life: 50,000-100,000 h
Output	USB connection or connect external printer (optional)
Reporting	Continuous/storage/print modes
optional	printer,carrying case

Base instrument, scan probe, connection device, upstream sampling pipe, power wire

Contact for more：

 Jenny.tian@norda-china.com  wechat ID ：Jenny18626296397   Skype：lingx360 

www.nordachina.com/en     www.nordachina.com/en     www.nordachina.com/en 

www.nordachina.com/en     www.nordachina.com/en     www.nordachina.com/en 

wechat ID ：Jenny18626296397       sales2@norda-china.com    Wechat：a2850331356

wechat ID ：Jenny18626296397       sales2@norda-china.com    Wechat：a2850331356

Instruments for cleanroom/equipments/aerosol photometer/Dop hepa detection/particle counter/flow pattern tester/Smoke machine  

 

Suzhou Norda Cleaning Tech Co., Ltd is a high-tech corporation specialized in develop,
manufacture,sales of air purification equipments and air test instruments, and also undertake
design, construction,installation ofair purification system project.

Depending on outstanding engineers and skillful workers, we absorb advanced techniques home and
abroad, and keep continual innovation to develop and manufacture new products and techniques for
satisfying customers’ actual demands.

Under the consistent objective to upgrade technical abilities and offer satisfactory solution for clients,
we also win the recognition from clients of different regions by offering the right products that you're
looking for, and Meanwhile, after service offices can be found, like in Europe, India,Korea,and others.

Our products are widely applied to micro-electronics, optics, precise machinery, medical and health,
bio-pharmaceuticals, food and drinks, aviation and space flight, and other industrial aspects, as well
as the research in colleges, universities and institutes, and the sterile sickrooms in hospitals.

Our philosophy

“Keep Improvement
Customer First
Continuous Innovation
Human Centered”