High Pressure Fixed Bed Reactor Evaluation System,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

Feature:

1. all components of the fixed bed reactor evaluation system are made of high quality products.

2. one way gas and one way liquid.

3. the fixed bed reactor tube is a double-layer tube reactor, consisting of an outer stainless steel tube and an inner quartz reactor tube, with a built-in temperature measuring sleeve for real-time monitoring of the catalyst bed temperature. The fixed bed reactor tube is easily dismantled. The fixed bed reactor is a Haff furnace (double opening furnace) with single stage temperature control, power <2000 W, control temperature RT~800 oC, precise temperature control by PID, thermostatic process temperature control accuracy <±1 oC.

4. the exhaust gas at the lower end of the reactor can simultaneously enter the gas-liquid separator for product condensation and gas-liquid separation, as well as the chromatograph for full product analysis in the holding condition.

5. the lower end of the reactor is equipped with a gas-liquid separator (collector) with a double-layer structure and a liquid accumulation tank inside the collector for condensation and collection of the reaction products, which can be sampled after a certain period of time through a lower needle valve

6. the placement of the chromatograph next to the reaction unit so that the pipeline to the chromatograph is as short as possible to minimise product residues

7. an aluminium alloy frame with a compact and aesthetically pleasing design, in addition to a suitable size design to facilitate routine maintenance and normal dismantling.

Technical Parameters:

1. design pressure: 0 to 10 MPa, actual operating pressure 0 to 6 MPa.

2. single-section open thermostat furnace with dimensions of approx. 200 mm long * 200 mm long * 300 mm high.

3. design reaction temperature: room temperature ~ 800 oC, holding tank temperature RT ~ 400 oC, control accuracy <±1 oC.

4. double-layer stainless steel reaction tube in which the quartz tube size is approximately 8 mm outside and 6 mm inside, with a catalyst filling volume of 0~1 ml; the quartz tube can be used at atmospheric pressure.

5. one way gas, accuracy ±1% F.S, linearity deviation ±1% F.S, accuracy ±0.2% F.S, response time 2-4 s.

6. condenser of double-layer construction with internal condensing coil, inner volume approx. 50 ml (outer volume 150 ml)

Configulation List:

SN	Item	Spec	QTY	Manufacturers
1	Stainless steel high-pressure regulator valves	R41LG-DEW /R44SLGK	1	Anlock USA
2	Pressure gauge class 2.5, range 25 MPa	Φ60	1	Zhejiang Hongqi
3	Pressure gauge class 2.5, range 10 MPa	Φ60	1	Zhejiang Hongqi
4	Pressure gauge class 0.4, range 6 MPa	Φ150	1	Zhejiang Hongqi
5	One-way valves	SS-116	1	Kumagawa
6	Filters	SS-223	2	Kumagawa
7	Secondary meter (programmed temperature control, reactor temperature control)	FT-808P	1	Guangzhou Temaker
8	Secondary meter (single point temperature control, heating tape temperature control)	FT-807GX	2	Guangzhou Temaker
9	Secondary meter (flow meter control)	FT-807-GX7	1	Guangzhou Temaker
10	Secondary table (reaction temperature)	FT-807GN	1	Guangzhou Temaker
12	Electronic regulators	LSA-H1	2	Zhejiang Longke
13	Switching power supplies	IQ-60F	1	Meanwell Taiwan
14	Protective switches	DZ47LE	1	WenzhouZhengtai
15	Through-plate two-way	316 L	2	Anlock USA
16	Triple valves	316 L	3	Anlock USA
17	Switching valves	316 L	3	Kumagawa
18	Needle Valves	316 L	2	Kumagawa
19	Stainless steel reaction tubes (can be made as double pressure resistant reaction tubes with built-in quartz tubes)	RT-100	2	Xi'an Taikang
20	Reaction tube fittings	TL-20	4	Xi'an Taikang
21	Refrigeration pumps		1	Xi'an Taikang
22	Collector	LGCS	1	Xi'an Taikang
23	Back pressure valve	R72LA-E-W /R72SLAK	1	Kumakawa
24	Stainless Steel Thermowells	SG-5	1	Kumagawa
25	Thermocouple (with yellow connector)	K型	3	OMEGA
26	Frames, wires, pipes, ferrules
27	Packing and transport