LWD series Centrifuge for separation of detrital material of drilling muds is widely used in solid control system for drilling mud to separate the solids phase of mud, remove harmful fine drill solids such as debris, etc. in the mud fluid, or recover weighting materials such as barite etc. so as to reduce the cost of mud fluid.
3 drive modes: RFD and VFD, FHD satisfied with many customers' choice !
FHD(Fully hydrauli drive) centrifuge is driven by fully hydraulic power.
As to RFD(rated frequency drive) centrifuge, the rotating bowl speed is fixed, so the speed can be changed only by changing drive pulley;
While VFD (variable frequency drive) centrifuge can achieve large-range stepless speed regulation easily with parameters
displayed, e.g. speed and working current.
Horizontal spiral discharge sedimentation centrifuge (referred to as decanter centrifuge) is an effective separation equipment which use centrifugal acceleration generated by high-speed rotation into the acceleration of gravity to shorten thousands of times of the settlement time of solid particles than in the gravity field.
The solid particles are discharged from the drum through the screw conveyor continuously and without interruption.
Centrifuge Drum and spiral parts titanium welding with 304/316 / 316L/321 stainless steel, stale performance and long service, warmly welcomed by the customers at home and abroad.
Circumstance Conditions:
Explosion protection Grade: ExdⅡBT4
Ambient temperature: -20°C～+50°C
Relative humidity of ambient air: ≤95%
Corrosive environment: No active gas or steam that will destroy the metal
Degree of electrical protection: IP55
中文
