AE-Pilot Series Freeze Dryer Specification (Laboratory)：

Model	AE-Pilot1 -2LD		AE-Pilot2 -4LD	AE-Pilot1 -2MD		AE-Pilot2 -4MD	AE-Pilot2 -4L		AE-Pilot2 -4M	AE-Pilot2-4H
Shelf Usable Area	0.1		0.2	0.1		0.2	0.2		0.2	0.2
Cold Trap (℃)	-55		-85	-55		-85	-85		-85	-85
Stopper	Yes		NO	YES		NO	YES		YES	YES
Adjust Vacuum System	NO		NO	YES		YES	NO		NO	YES
Automatic Purge System	NO		NO	YES		YES	NO		NO	YES
Automatic drainage system	NO		NO	NO		NO	NO		NO	YES
1.5 km far remote control system	NO		NO	NO		NO	NO		NO	NO
Vacuum	<8Pa		<8Pa	<6Pa		<6Pa	<6Pa		<6Pa	<6Pa
Condenser Capacity	3L		4L	3L		4L	4L		4L	4L
Compressor	7/8HP		2*7/8HP	7/8HP		2*7/8HP	2*7/8HP		2*7/8HP	2*7/8HP
Vacuum	2L/S
Dimension (mm)	W750*D730*H600	W740*D800*H1330			W750*D730*H600	W740*D800*H1330		W660*D850*H1440

 AE-Pilot Series Freeze Dryer Specification (Production Process):

Model	AE-Pilot3-6H	AE-Pilot5-8H	AE-Pilot3-6T	AE-Pilot5-8T	AE-Pilot10-15T
Shelf Usable Area	0.3	0.5	0.3	0.5	1.0
Through Wall	NO	NO	YES	YES	YES
Cold Trap (℃)	-85
Stopper	YES
Vacuum Backfilling System	YES
Adjust Vacuum System	YES
Automatic Purge System	YES
Automatic drainage system	YES
1.5 km far remote control system	YES
Vacuum	<8Pa	<8Pa	<6Pa	<6Pa	<6Pa
Condenser Capacity	3L	4L	3L	4L	4L
Compressor	7/8HP	2*7/8HP	7/8HP	2*7/8HP	2*7/8HP
Dimension (mm)	W1400*D760*H1800	W1400*D760*H1800	W760*D900*H1800	W860*D1400*H1800	W860*D2100*H1900

 

AE-Pilot Series Freeze Dryer

1.  Adopt the PLC and HMI

User-friendly interface,easy to understand, do not need instructions can also operte.

2.  Automatic Programmable Control System

From drying to defrosting,user-friendly programmable controls enable you to start runs quickly and the microprocessor controls different ramping and holding segments to meet different temperature protocols.

3.  Heating Drying System

By controlling temperature by forceful circulation of the heat medium of shelf inside,it obtains a further precise distribution of temperatures.

4.  Pre-freeze System

In place pre-freezes sample to save money and time, eliminating the need for a separate freezer and product transfer.

5.  Defrosting System

Automatically defrosting system is available for cold tray when defrosting is necessary.

6.  Vacuum Backfilling System

As far as the permanent preservation of the sample desiccation is concerned it protects a sample by inserting sterile air and nitrogen gas with back filling system for preventing contamination of the sample.

7.  Adjust Vacuum System

During the freeze drying, adjust the vacuum can improve the freeze drying dfficiency(5-300Pa)

8.  Automatic drainage system

After the drainage and vacuum system interlocking, avoid forget the breakdown of the drain valve in order to produced  the vacuum pump(optional).

9.  Safety Stoppering System

For the purpose of permanent preservation of a sample after freeze dryig, the stopper system, which seals under a vacuum state, consists an option that installs moving guides shelves delicately and that has a function to seal safely and precisely using a rotating sealing device.

10.  Automatic Purge System

It is equipped with an automated purge system to protect samples by preventing of counter-flow vacuum pump oil.

11.  Compressor Delayed Protection

Compressor delayed start function to minimize any damage to compressor.

12.  1.5 km far remote control system.

The user can control the device by far remote control system(optional).

 

A&E Labmed Co., Ltd have many years of manufacturing and selling wide range of scientific and laboratory instruments. Our products mainly include: UV VIS Spectrophotometer, Visible Spectrophotometer, PCR Cycler, Stirrer Hotplate, Shaker, Rocker, Block Heater, Mixer, PH/Conductivity/TDS/Salinity/Dissolved Oxygen/Free Chlorine Meter, Halogen Moisture Analyzer, Ultrasonic Cleaner and Microscope, etc.