Main characteristics:
1.Adopt the PLC and HMI
User-friendly interface,easy to understand, do not need instructions can also operte.
2. Automatic Programmable Control System
From drying to defrosting,user-friendly programmable controls enable you to start runs quickly and the microprocessor controls different ramping and holding segments to meet different temperature protocols.
3. Heating Drying System
By controlling temperature by forceful circulation of the heat medium of shelf inside,it obtains a further precise distribution of temperatures.
4. Pre-freeze System
The chamber pre-freezes sample to save money and time,eliminating the need for a separate freezer and product transfer.
5. Defrosting System
Automatically defrosting system is available for cold tray when defrosting is necessary.
6. Vacuum Backfilling System
As far as the permanent preservation of the sample desiccation is concerned it protects a sample by inserting sterile air and nitrogen gas with back filling system for preventing contamination of the sample.(optional)
7. Adjust Vacuum System
During the freeze drying, adjust the vacuum can improve the freeze drying dfficiency(5-300Pa).(optional)
8. Automatic drainage system
After the drainage and vacuum system interlocking, avoid forget the breakdown of the drain valve in order to produced the vacuum pump(optional).
9. Safety Stoppering System
For the purpose of permanent preservation of a sample after freeze dryig, the stopper system, which seals under a vacuum state, consists an option that installs moving guides shelves delicately and that has a function to seal safely and precisely using a rotating sealing device.
10. Automatic Purge System
It is equipped with an automated purge system to protect samples by preventing of counter-flow vacuum pump oil.(optional)
11. Compressor Delayed Protection
Compressor delayed start function to minimize any damage to compressor.
12. 1.5 km far remote control system.
The user can control the device by far remote control system(optional).
Choose guide:
AE-LAB series have five types: Common type, stopper type, Adapter type, stopper &Adapter type, T drying chamber type. Load material difference:
Common Type: Suit loading bulky material.
Stopper Type: Suit loading penicillin bottle .
Adapter type:Suit loading hang bottle .
Stopper &Adapter type:Suit to loading bulky material, bottled material and hang bottle.
T drying chamber type:Suitable for loading ampoule bottle.
Suit freeze sample :Water-soluble aqua, muddy liquid or paste-like in shape material, the crystal temperature is higher than-20 ℃.
Optional:
★ Crystal Temperature Test Instrument ★Sample Temperature Monitor
★ Vacuum Backfilling System ★Adjust Vacuum System
★Automatic drainage system ★Automatic Purge System
★Six/Eight Layers Drying Chamber ★Six/Eight Layers Drying Chambe&Valves
★ Build-In Chamber ★Manifold Chamber
★Ampoule Bottle Sealing Device ★Capping Device
★Internationial Brand Vacuum Pump ★Oil Mist Filter
★Vacuum Pump Defend Return Oil Device ★Vacuum Oil
★Backfill Filter ★Flask
★Serum Bottle ★1.5 km far remote control system.
AE-Lab series freeze dryers technique parameter (Economical):
|
Mode
|
AE-Lab1A-50E
AE-Lab1A-80E
|
AE-Lab1B-50E
AE-Lab1B-80E
|
AE-Lab1C-50E
AE-Lab1C-80E
|
AE-Lab1D-50E
AE-Lab1D-80E
|
AE-Lab1E-50E
AE-Lab1E-80E
|
|
Shelf Area
|
0.12
|
0.08
|
0.12
|
0.08
|
__________
|
|
Cold Trap
(Unload)
|
-55/-85
|
-55/-85
|
-55/-85
|
-55/-85
|
-55/-85
|
|
Vacuum
(Unload)
|
<8Pa
|
|
Condensor Capacity
|
3L/4L
|
|
Compressor
|
7/8HP
2*2/3HP
|
|
Vacuum Pump
|
2L/S
|
|
Dimension
|
W470*D600*H400
W640*D640*H1000
|
bio-equip.cn
A&E Labmed Co., Ltd have many years of manufacturing and selling wide range of scientific and laboratory instruments. Our products mainly include: UV VIS Spectrophotometer, Visible Spectrophotometer, PCR Cycler, Stirrer Hotplate, Shaker, Rocker, Block Heater, Mixer, PH/Conductivity/TDS/Salinity/Dissolved Oxygen/Free Chlorine Meter, Halogen Moisture Analyzer, Ultrasonic Cleaner and Microscope, etc.
中文
